Welcome to Koi Forum. Is this your first visit? Register
Results 1 to 6 of 6
  1. #1

    New house, with a free pond needing new breath of life!

    Hi all!
    We moved into our new house a few months ago, and it comes with a free pond in the garden! I'd like to bring it back to life, and would appreciate advice from people who know more about this than I do!

    It's a rectangle pond measuring around 3.1m x 1.75m x 1.4m deep. By my reckoning that's around 7600 litres / 1600 gallons.

    Now to the equipment. From looking around and Googling, this is what I appear to have:
    Sieve filter (50 gallon) (brand currently unknown)
    EazyPod filter
    Air pump (Evolution Aqua)
    UV thingamebob (Yamitsu 55A)

    From the position of the pump, I believe it's a gravity-fed setup.

    It had been left with a couple of feet of water, looking quite green. Today I have filled it up and turned everything on. My thinking (this is where you may tell me I'm going about it wrong) is to now run it for a week or two to let the skimmer, filter, and UV do their thing. I'll then replace the K1 micro (it's old, and doubt it contains any useful bacteria) and find out how to mature it before adding Koi.

    Although I've never kept Koi, I am an experienced tropical fish keeper so reasonably knowledgeable when it comes to biological filtration, nitrogen cycle etc.

    I guess my main question is whether there's anything else I should be doing, or need to consider? Am I right in starting about it just by turning things on, or have I missed a crucial step? I should add there wasn't a huge amount of sludge on the bottom.

    Any advice greatly appreciated!



  2. Thanks john1 Thanked / Liked this Post
  3. #2
    Senior Member Rank = Supreme Champion Ajm's Avatar
    Join Date
    Mar 2018
    Location
    Durham
    Posts
    11,220
    Thanks / Likes
    21135
    Personally (and some may disagree) I would have pond vac'd the lot out and give a very good deep hard scrub with some it like vikron high dose .

    Stripped every bit of equipment down .

    Emptied all k1 out washed hosed as much crap out as possible

    The refitted the whole system filled with water and a massive dose of pp and left it for 24 hours without pumps then turned all on except the uv and ran for another 24 hours ( topping up pp it keep it very strong )

    Before rising, washing down and refilling .

    . K1 is only plastic I would clean and keep . Used roughed up k1 is going to mature a lot quicker than new k1 .


    But must say again this is only my personal approach and thoughts

    Sent from my SM-G973F using Tapatalk
    Freddyboy the legend

    "we are water keepers first"

    Johnathan

  4. Thanks john1, davethefish1, RS2OOO, voodoo_15_uk Thanked / Liked this Post
  5. #3
    Extreme Koi Member Rank = Supreme Champion john1's Avatar
    Join Date
    Aug 2013
    Location
    N.Wales.
    Posts
    8,700
    Thanks / Likes
    15243
    Hi and welcome Richard.
    Would do as per Aj above,empty completely sterilise everything as you dont know what was going on in the pond beforehand.

    A few photos would be good.
    John

  6. Thanks Ajm, davethefish1, RS2OOO Thanked / Liked this Post
  7. #4
    Senior Member Rank = Supreme Champion Ajm's Avatar
    Join Date
    Mar 2018
    Location
    Durham
    Posts
    11,220
    Thanks / Likes
    21135
    Would add make sure to scrub and disinfect the surrounding area aswell to help with any run off ect

    Sent from my SM-G973F using Tapatalk
    Freddyboy the legend

    "we are water keepers first"

    Johnathan

  8. Thanks john1, davethefish1 Thanked / Liked this Post
  9. #5
    I agree with AJM - totally empty it and pondvac it, washing down the walls etc.
    But since you've filled it yesterday, I'd keep it filled for a week or so to check for the elephant in the room first - ie LEAKS!
    If there's no leaks, then drain it and get scrubbing, and enjoy yourself!

  10. Thanks Ajm, davethefish1 Thanked / Liked this Post
  11. #6
    Senior Member Rank = Supreme Champion RS2OOO's Avatar
    Join Date
    Feb 2018
    Location
    South East
    Posts
    5,935
    Thanks / Likes
    13161
    Agree with all the above, but since you've already filled it you could try putting a very strong dose of Virkon into the system now to fully sterilise everything as the water circulates.

    Doesn't sound like a bad little set up to inherit, a nice starter size pond and some reasonable equipment.

    You'll likely need to replace the UV bulb.

    As good as the easypods are, I think you are reaching its max limits with that size pond, so when you do start stocking with koi you will want to go slow and try not to overwhelm the filter.

    You could also try adding a few drops of ammonia each day to get some level of maturation into the bio before adding any fish, with a view to getting your first fish from say mid-may onwards.

  12. Thanks Ajm, john1 Thanked / Liked this Post
 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT +1. The time now is 09:11 AM. Online Koi Mag Forum
Powered by vBulletin® Version 4.2.3
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.

vBulletin Improved By vBFoster® (Lite Version), © UltimateScheme, Ltd.