Results 1 to 10 of 10
Thread: Welsh newbie
-
19-05-2020, 04:57 PM #1
Welsh newbie
Hi all, newbie from Wales just joined
Have skimmed through the forum and will spend a few hrs tonight reading in depth, looks very good and informed
Have posted my question in the filtration section, hope that's right and it isn't supposed to be here for a newbie
-
19-05-2020, 05:21 PM #2
Welcome to the forum jonnyswamp …….. there's a few on here from Wales so you wont feel alone
-
jonnyswamp, freddyboy Thanked / Liked this Post
-
19-05-2020, 09:22 PM #3
Welcome to the Forum.
Cheers
GazHobby and business gone but when you’re hooked you’re hooked.
Always happy to help!!
-
jonnyswamp, freddyboy Thanked / Liked this Post
-
19-05-2020, 09:43 PM #4
Hi Jonny and welcome to the forum
Sent from my iPhone using Tapatalk4600 Gallon Concrete Block and Fiberglass
2100 mm x 710 mm Infinity Window 32mm thick glass
2 x Aerated Bottom Drains and Skimmer
Filtreau HiFlow 30 Drum Filter
Bio Chamber - 140 litres K1
Bakki Shower - 30 KG Sakura Far Infrared Media
2 x 18,000 lh pumps
Heated from house boiler through a heat exchanger
Idealseal MS290
My Pond Build
-
freddyboy, jonnyswamp Thanked / Liked this Post
-
19-05-2020, 10:24 PM #5
-
freddyboy, jonnyswamp Thanked / Liked this Post
-
19-05-2020, 10:29 PM #6
Hi Johnny..
Welcome to the forum..
From one Welshman to another..
Iechyd Da..
Sent from my CLT-L09 using Tapatalk
-
-
19-05-2020, 11:29 PM #7
[QUOTE=Binary1927;331600]
From one Welshman to another..
Iechyd Da.. gbwls I'll translate for you Johnnyswamp…...Binary said.....My ponds bigger than yours
-
-
20-05-2020, 07:51 AM #8
-
anne Thanked / Liked this Post
-
20-05-2020, 07:52 AM #9
-
jonnyswamp, anne Thanked / Liked this Post
-
20-05-2020, 08:14 AM #10
Thanks for the welcome guys, appreciated
Anyone shed any light on my post regarding pump and filter position
TIA
Swampy
Running heater at low temp?
Covering the pond with polycarb should be enough to stop water temps dipping below 6C for the most...