Results 1 to 4 of 4
Thread: Econobead multiport top removal
-
18-01-2025, 04:57 PM #1
Econobead multiport top removal
Hi there does anyone know how to remove the top part of the multiport it twists a small turn then I just can’t take it off ? I’m mythed regards tom
-
18-01-2025, 07:54 PM #2
-
19-01-2025, 04:11 AM #3
Hi manky here is eb filter it’s the one without no screws ?
-
19-01-2025, 05:55 PM #4
Second go at answering. The first just vanished when I pressed "Post" so, if it turns up anywhere, It wasn't my fault!!!
There are a few multiports that are used for swimming pool filters and they all have screws at the top so they can be stripped for maintenance but that's a cheap copy.
However, before assuming the top is glued to the bottom, look underneath to see if there are screws. If there are, don't get enthusiastic and start undoing them, Post a picture first and I'll tell you how to do it without breaking it. Once the top is off, the rest will be easy (ish)
Brick / Decorative Facing Block...
Thanks all, some great suggestions. I have loads of white vinegar so will give that a try...