Results 1 to 5 of 5
Thread: By Passing DRUM when doing Meds
-
05-06-2020, 07:42 PM #1
By Passing DRUM when doing Meds
Hi All just curious how Members bypass DRUM when doing Treatments to avoid weakening or diluting mixture. As DRUM ditches fair load over time, many thanks in advance Dean ????
-
05-06-2020, 09:19 PM #2
I’ve got the Filtreau hi-flow 30 and it has a built in bypass, it’s got two bungs that you have to remove between the clean and dirty side, simple and effective
Sent from my iPhone using Tapatalk4600 Gallon Concrete Block and Fiberglass
2100 mm x 710 mm Infinity Window 32mm thick glass
2 x Aerated Bottom Drains and Skimmer
Filtreau HiFlow 30 Drum Filter
Bio Chamber - 140 litres K1
Bakki Shower - 30 KG Sakura Far Infrared Media
2 x 18,000 lh pumps
Heated from house boiler through a heat exchanger
Idealseal MS290
My Pond Build
-
05-06-2020, 09:50 PM #3
The Solum 16 has two panels with bolts that open to allow bypass.
-
06-06-2020, 09:08 AM #4
remove the screens.
-
06-06-2020, 01:10 PM #5
Not a five minute job removing the screens on mine.
Running heater at low temp?
Covering the pond with polycarb should be enough to stop water temps dipping below 6C for the most...