Welcome to Koi Forum. Is this your first visit? Register
Page 3 of 3 FirstFirst 123
Results 41 to 57 of 57
  1. #41
    I was just going to ask if you had any photos lol.

    So the plan with mine so far is water will come from bottom drain to a 850mm diameter settlement tank. That will have the answer sat in. I've got a 1600mm x 1000mm x 1000mm fiberglass tank that will be used as the anoxic filter. But think ill need somthing between them unless I could have the sock on the 4" inlet of the anoxic tank ??

    Sent from my SM-G930F using Tapatalk

  2. Thanks Frimley Koi keeper Thanked / Liked this Post
  3. #42
    Quote Originally Posted by colinley1979 View Post
    I was just going to ask if you had any photos lol.

    So the plan with mine so far is water will come from bottom drain to a 850mm diameter settlement tank. That will have the answer sat in. I've got a 1600mm x 1000mm x 1000mm fiberglass tank that will be used as the anoxic filter. But think ill need somthing between them unless I could have the sock on the 4" inlet of the anoxic tank ??

    Sent from my SM-G930F using Tapatalk
    I think I have photos of it just haven't ever put them on here going by my attachments so I'll see if I can find them and put them on here OK

  4. #43
    Cheers buddy

    Sent from my SM-G930F using Tapatalk

  5. #44
    I think I've found a photo that shows the entire bypass and filter sock system but it is only on my phone at the moment. I will get it transferred to the laptop and then I can stick it on here for you tomorrow hopefully.

  6. #45
    Cheers mate

    Sent from my SM-G930F using Tapatalk

  7. Thanks Frimley Koi keeper Thanked / Liked this Post
  8. #46
    Quote Originally Posted by colinley1979 View Post
    Cheers mate

    Sent from my SM-G930F using Tapatalk
    No problem

  9. #47
    OK finally I have sorted the photo out

    2020-04-22 09.01.00.jpg

    Not the best photo but it does basically show the T with the 45 then a 90 for the overflow bypass system.

    What's fitted to the 90 was a reducer then a drilled out 3" pipe but I think I have currently got a bit of 4" pipe over the 3" pipe acting as a kind of silencer. The drawing shows the old version without the 4" pipe.
    Attached Images Attached Images

  10. #48
    When I had the silencer attached to the directly to the outlet of the Eazy Pod before I fitted the overflow bypass system it worked a treat but now it's only on the overflow bypass system it is only quiet when the water is flowing through it as the straight through section of the T now has a slide valve a filter sock on it and as the sock starts to block the water tends to come out in a longer line along the sock acting a little bit like a water blade. It's a bit noisy as you can imagine but all the neighbours that I've spoken to about it say they like the sound of the splashing water and some deliberately open their windows to hear it in the evening

  11. #49
    I wonder who will notice the invisible mend on the net

    I keep meaning to replace the net and have got a black one already to go but I am thinking about putting 2 x 45s between the T and the Eazy Pod then replacing the T with a Y (well it's more of a branched T) and then the slide valve and overflow bypass system off of that so it keeps it closer to the edge of the pond? so may need to have a rejig of the way the frame work for the net gets altered to allow for the pipe work to and from the pond?

    Don't remember why I went for green originally unless I thought as the walls grow blanket weed or what ever they will go green apparently a black net disappears against the surface colour of the water?

  12. #50
    Talk about a watched pot never boils lol

    Normally the 400 micron sock needs replacing and cleaning every 2 to 4 days and sometimes it will last a week but since I received the 200 micron socks it hasn't needed swapping for what appears to be 11 days according to the diary. Surely that can't be right I think I might have swapped it a few days ago and forgotten to make a note of it

  13. #51
    Hopefully I will swap to the 200 micron sock later today or tomorrow and see how it goes.

    Thanks Colin

  14. Thanks Goonerharwood Thanked / Liked this Post
  15. #52
    Senior Member Rank = Gosai Goonerharwood's Avatar
    Join Date
    Oct 2016
    Location
    Huntingdon
    Posts
    265
    Thanks / Likes
    374
    Quote Originally Posted by Frimley Koi keeper View Post
    Hopefully I will swap to the 200 micron sock later today or tomorrow and see how it goes.

    Thanks Colin
    Hope it works out for you Frim have got another plan in progress but will keep you in suspense for a few days just waiting for the CT1 to cure

    Colin

  16. Thanks Frimley Koi keeper Thanked / Liked this Post
  17. #53
    Quote Originally Posted by Goonerharwood View Post
    Hope it works out for you Frim have got another plan in progress but will keep you in suspense for a few days just waiting for the CT1 to cure

    Colin
    Will keep you updated Colin

    Sounds like you are doing some secret squirrel stuff I'm intrigued now, any clues yet? Lol

  18. Thanks Goonerharwood Thanked / Liked this Post
  19. #54
    Senior Member Rank = Gosai Goonerharwood's Avatar
    Join Date
    Oct 2016
    Location
    Huntingdon
    Posts
    265
    Thanks / Likes
    374

  20. Thanks Frimley Koi keeper Thanked / Liked this Post
  21. #55
    Quote Originally Posted by Goonerharwood View Post
    I have signed the official secrets act in the past so I have got the right clearance

  22. #56
    Ok quick update, swapped the 400 micron filter sock for a 200 micron filter sock late afternoon so will see what happens. So far not much is being collected but the same applied to the 400 as that took ages to get anywhere near dirty and only changed them to remove the muck before it started to go bad

    I need to fit some 3" pressure pipe to hold the new sock out straight as the 400s were a bit more bulky and kept their shape unless it was windy

    Was going to drill 20 or 25mm holes in the pipe to spread the water along the sock a bit more which I was thinking about doing for the 400s anyway

  23. #57
    Checked the sock this morning at around 8 am and it's definitely collecting some muck

 

 
Page 3 of 3 FirstFirst 123

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT +1. The time now is 03:35 AM. Online Koi Mag Forum
Powered by vBulletin® Version 4.2.3
Copyright © 2020 vBulletin Solutions, Inc. All rights reserved.

vBulletin Improved By vBFoster® (Lite Version), © UltimateScheme, Ltd.