Results 81 to 100 of 103
-
15-05-2020, 06:34 PM #81
-
Frimley Koi keeper Thanked / Liked this Post
-
15-05-2020, 06:35 PM #82
-
Frimley Koi keeper Thanked / Liked this Post
-
15-05-2020, 07:25 PM #834600 Gallon Concrete Block and Fiberglass
2100 mm x 710 mm Infinity Window 32mm thick glass
2 x Aerated Bottom Drains and Skimmer
Filtreau HiFlow 30 Drum Filter
Bio Chamber - 140 litres K1
Bakki Shower - 30 KG Sakura Far Infrared Media
2 x 18,000 lh pumps
Heated from house boiler through a heat exchanger
Idealseal MS290
My Pond Build
-
Frimley Koi keeper, freddyboy Thanked / Liked this Post
-
15-05-2020, 07:27 PM #84
Pressure range between 2.0 and 8.0 bar
IMI
Type E2000-A4600 Gallon Concrete Block and Fiberglass
2100 mm x 710 mm Infinity Window 32mm thick glass
2 x Aerated Bottom Drains and Skimmer
Filtreau HiFlow 30 Drum Filter
Bio Chamber - 140 litres K1
Bakki Shower - 30 KG Sakura Far Infrared Media
2 x 18,000 lh pumps
Heated from house boiler through a heat exchanger
Idealseal MS290
My Pond Build
-
Frimley Koi keeper, freddyboy Thanked / Liked this Post
-
15-05-2020, 08:44 PM #85
-
freddyboy Thanked / Liked this Post
-
15-05-2020, 10:51 PM #86
-
Frimley Koi keeper, freddyboy Thanked / Liked this Post
-
16-05-2020, 07:39 AM #87
-
16-05-2020, 08:05 AM #88
Yep its standard 1/2" BSP female,
4600 Gallon Concrete Block and Fiberglass
2100 mm x 710 mm Infinity Window 32mm thick glass
2 x Aerated Bottom Drains and Skimmer
Filtreau HiFlow 30 Drum Filter
Bio Chamber - 140 litres K1
Bakki Shower - 30 KG Sakura Far Infrared Media
2 x 18,000 lh pumps
Heated from house boiler through a heat exchanger
Idealseal MS290
My Pond Build
-
Frimley Koi keeper, freddyboy Thanked / Liked this Post
-
16-05-2020, 08:13 AM #89
OK thanks, just looked on Screwfix and they only do 20mm x 3/4" male adapters going to have a look on Toolstation to see if they do 20mm x 1/2" male adapters. I did see Screwfix sell a 22mm compression fitting PRV but I'm not sure if that would fit as the inline valve is sold as 20mm for the poly pipe?
-
freddyboy Thanked / Liked this Post
-
16-05-2020, 08:17 AM #90
If you want it Frim, PM me your address and i'll stick it in the post, its been in storage for a few years and i'll never use it now, work paid for it
4600 Gallon Concrete Block and Fiberglass
2100 mm x 710 mm Infinity Window 32mm thick glass
2 x Aerated Bottom Drains and Skimmer
Filtreau HiFlow 30 Drum Filter
Bio Chamber - 140 litres K1
Bakki Shower - 30 KG Sakura Far Infrared Media
2 x 18,000 lh pumps
Heated from house boiler through a heat exchanger
Idealseal MS290
My Pond Build
-
Frimley Koi keeper, freddyboy Thanked / Liked this Post
-
16-05-2020, 08:21 AM #91
-
freddyboy Thanked / Liked this Post
-
16-05-2020, 08:23 AM #924600 Gallon Concrete Block and Fiberglass
2100 mm x 710 mm Infinity Window 32mm thick glass
2 x Aerated Bottom Drains and Skimmer
Filtreau HiFlow 30 Drum Filter
Bio Chamber - 140 litres K1
Bakki Shower - 30 KG Sakura Far Infrared Media
2 x 18,000 lh pumps
Heated from house boiler through a heat exchanger
Idealseal MS290
My Pond Build
-
-
16-05-2020, 08:24 AM #93
-
freddyboy Thanked / Liked this Post
-
16-05-2020, 08:26 AM #94
I'll put an FOC invoice in so you can show your Fun Sponge
4600 Gallon Concrete Block and Fiberglass
2100 mm x 710 mm Infinity Window 32mm thick glass
2 x Aerated Bottom Drains and Skimmer
Filtreau HiFlow 30 Drum Filter
Bio Chamber - 140 litres K1
Bakki Shower - 30 KG Sakura Far Infrared Media
2 x 18,000 lh pumps
Heated from house boiler through a heat exchanger
Idealseal MS290
My Pond Build
-
-
16-05-2020, 08:37 AM #95
Lol nice one Roy
If it was me I'd keep the same letters apart from the C if she said anything lol
Why is it that predictive text only works when you don't want it to!!!
I PMd someone yesterday and to enter my address only had to enter the first letter of each line but this morning I had to write every letter!!
BTW YHPM thanks
-
freddyboy Thanked / Liked this Post
-
16-05-2020, 08:56 AM #96
The part 1 float valve that I use to control the flow into the pond has got a long bar which goes to a cylindrical float OK, as the current fill level is too low can the bar be bent upwards slightly to get a higher fill level?
I asked the plumber I used and he suggested using a part 2 float valve which you can adjust the height of the float but I didn't like the idea of having a bar sticking downwards into the water below the float as it would be a danger to the fish so went for the part 1 version same as I had before which I had to replace as it was starting to leak and over fill the pond. I was just going to remove the complete valve, stick it in a vice and then give the bar a bit of a bend but wanted to know if it was OK to give it a try?
-
freddyboy Thanked / Liked this Post
-
16-05-2020, 09:51 AM #97
Last edited by Tom Koi; 16-05-2020 at 09:57 AM.
-
Frimley Koi keeper, freddyboy Thanked / Liked this Post
-
16-05-2020, 10:07 AM #98
From recent experience, with 20mm poly pipe, I had to replace the toolstation fittings with screwfix ones including the inserts and for the PRV I can only find the fittings I need at toolstation!!! Hopefully the leaks I had before were down to the toolstation inserts being fractionally smaller than the screwfix ones so if I use the screwfix inserts with the toolstation fittings I will be OK
That's the common problem with plumbing stuff, different makes are fractionally different sizes even though they are claiming they are actually the same size and as you need a water tight fit that fraction of a mm difference may not sound like much but it's the difference between a good non leaking seal and a slightly leaking seal
-
freddyboy Thanked / Liked this Post
-
16-05-2020, 10:33 AM #99
-
Frimley Koi keeper, freddyboy Thanked / Liked this Post
-
16-05-2020, 10:47 AM #100
The inline tap was for 20mm poly pipe but from Toolstation and that has to be tightened up pretty tightly to get both olives to compress enough to stop the leaks lol
Just nee to sort out a couple of leaks on the canisters and possibly the flow meter fittings as well. I think the canisters just need a bit more tightening which may require a bit of a tap with a rubber mallet on the spanner.
-
freddyboy Thanked / Liked this Post
Aquaforte Dm vario 20000 pumps
Still for sale. Postage available for cost Sent from my SM-S901B using Tapatalk