Welcome to Koi Forum. Is this your first visit? Register
Results 1 to 9 of 9

Thread: 2 bucket filter

  1. #1

    2 bucket filter

    Hi guys,

    Quick one before I start cutting holes... in the attached image, would the water nicely transfer from filter 1 to filter 2 or is the design wrong?

    the red arrows show the flow. Not sure if the lack of gravity from 1 to 2 will work?


    thank you


    Attached Images Attached Images
    Last edited by bobby85; 07-10-2019 at 02:42 PM.

  2. #2
    Senior Member Rank = Gosai Sim's Avatar
    Join Date
    Nov 2018
    Location
    Berkshire
    Posts
    304
    Thanks / Likes
    446
    Hi
    Looking at your diagram it won't work.
    Your 2nd drum is shown to be higher than the first so would only fill to the water level of the first.
    They need to be really the same height.
    Where are you thinking of putting the pump?

  3. Thanks freddyboy Thanked / Liked this Post
  4. #3
    The pump is in the pond, pumping out into the UV, which then flows to filter 1. any ideas of how I could change it?

  5. #4
    Would this work?
    Attached Images Attached Images

  6. #5
    The second system would work if the connecting pipe between the two buckets is large enough diameter (110mm or 4 inch) but you will be making a rod for your own back if you're planning to feed water into biological media from below because it will silt up and would have to be removed every week to clean.

  7. Thanks freddyboy Thanked / Liked this Post
  8. #6
    Here's what I have at present and I just want to add a second bucket for extra filtration before I do an overhaul next year. Any ideas?

    image1.jpg

  9. #7
    https://www.diy.com/departments/hoze...1635821_BQ.prd

    I'm more worried about the bucket falling off.
    It would empty your pond if it did.

  10. Thanks Ajm, freddyboy Thanked / Liked this Post
  11. #8
    The bucket is secured in place it just doesn’t look it from that angle. What’s that link for a y connector for?

  12. #9
    Quote Originally Posted by bobby85 View Post
    The bucket is secured in place it just doesn’t look it from that angle. What’s that link for a y connector for?
    So you can split the hose feed from your pump to another bucket.
    Can't believe I had to answer that question tbh.

  13. Thanks Scottybee Thanked / Liked this Post
 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT +1. The time now is 11:17 PM. Online Koi Mag Forum
Powered by vBulletin® Version 4.2.3
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.

vBulletin Improved By vBFoster® (Lite Version), © UltimateScheme, Ltd.