Results 421 to 433 of 433
Thread: Diy shower
-
25-07-2019, 11:30 AM #421John
-
27-07-2019, 01:21 PM #422
-
28-07-2019, 12:20 AM #423
-
31-07-2019, 07:21 AM #424
-
john1 Thanked / Liked this Post
-
31-07-2019, 07:45 AM #425Built not bought!
-
18-08-2019, 06:37 PM #426
Hows the new boxes holding up mate
Sent from my SM-N950F using TapatalkFreddyboy the legend
"we are water keepers first"
Johnathan
-
05-09-2019, 09:09 PM #427
John do you have any pictures of how you did the seive on your shower . Only had the multibay up and running properly for a couple days and already am sick of cleaning brushes every day !!! As am pump fed thought I just stick a stacker box sieve then drop in to multibay
Sent from my SM-N950F using TapatalkFreddyboy the legend
"we are water keepers first"
Johnathan
-
07-09-2019, 08:28 AM #428
Sorry Aj only just noticed your post,yes the boxs are great really strong.
Thought I put on some pics but will have a look,the shower was copied from Dave vr6 he has it on you tube.
To be honest mate I took the seive out as I have a 10k pump on it and it blocked a lot,would work better with a slower pump which I havnt got.
I put some filter wool on the top which is great and I now have a filter sock on as well,the wool has to be cleaned often though.John
-
freddyboy Thanked / Liked this Post
-
07-09-2019, 08:45 AM #429
Aj,some pics around page 8.
Inlet I changed to just 1.5ins to a bend downwards in the middle.John
-
07-09-2019, 08:51 AM #430Freddyboy the legend
"we are water keepers first"
Johnathan
-
07-09-2019, 09:00 AM #431
He is ok Steve, if you do a shower I would recommend useing grog the big stuff,I got a bag of pumice and didn't like it as there were hardly any holes in it.
Will have a look for your pump thread,to be honest I havnt fully been on here much lately.John
-
freddyboy Thanked / Liked this Post
-
07-09-2019, 09:02 AM #432
Cheers john it's on general. Not doing a shower with this one just a pre filter as am cleaning brushes every day . Aye hes alright for a scouse hahaha sorry steve
Sent from my SM-N950F using TapatalkFreddyboy the legend
"we are water keepers first"
Johnathan
-
07-09-2019, 10:27 AM #433
There's always one flash git...
https://www.youtube.com/watch?v=Jm4wZpLIvs8
All that stainless pipework does look nice, though...
Here's a much more down to earth shower, taking inspiration from some of the Japanese breeders' fish houses:
https://www.youtube.com/watch?v=8VEgHn4-FLI
Momotaro quite clearly seem to have inspired the above
https://www.youtube.com/watch?v=EGil4BA_zQk
(FFW to 12:25)Last edited by MustBeSomethingInTheWater; 07-09-2019 at 10:51 AM.
-
Ajm Thanked / Liked this Post
Running heater at low temp?
Covering the pond with polycarb should be enough to stop water temps dipping below 6C for the most...