
Results 1 to 8 of 8
-
26-06-2022, 10:04 AM #1
fitting straight flange tank connector into raised block pond
i'm in middle of building a semi raised pond using 7N concrete blocks + liner
block works all done put im going to fit 2 1 1/2" returns to the pond
i just have couple questions do i fit the returns flush to the block work? just as you do with fibreglass and block construction
and one more thing should i have gone with 2inch returns?
-
davethefish1 Thanked / Liked this Post
-
26-06-2022, 10:44 AM #2
-
26-06-2022, 12:58 PM #3
the pond size is 9ftx6ftx5ft deep and im not using any celotex im just using box welded pond liner + 150g underlay
and as for pump im using a Varibale speed Aqua Eco 10,000 + a EazyPod
-
26-06-2022, 01:36 PM #4
Not the subject you are on I know . But 7600 liters .(1680 gallon) will a pod be enough to deal with that
Sent from my SM-G973F using TapatalkFreddyboy the legend
"we are water keepers first"
Johnathan
-
davethefish1 Thanked / Liked this Post
-
26-06-2022, 03:03 PM #5
sorry its 8.3ftx.4,5ftx5ft which is will 5674 litres or 1499 gallons which should be ok
Last edited by ukhunter; 26-06-2022 at 03:06 PM.
-
26-06-2022, 04:07 PM #6
-
Ajm Thanked / Liked this Post
-
26-06-2022, 04:19 PM #7
the eazypod works just fine in my mates 10.000 liter semi raised pond as it do for others that i have seen.
-
25-07-2022, 12:43 PM #8
i was thinking of making a DIY Shower as well as the EazyPod ?
Polycarb covers
Cheers mate . Dose alloy not leach toxins in the pond ? Sent from my SM-G973F using Tapatalk