Results 1 to 4 of 4
Thread: Installing a water blade
-
01-05-2021, 04:22 PM #1
Installing a water blade
Hi,
I have a 1.2m long water blade to install.
Question is how to install it so that I can brick across the top? Anyone got any guides/pictures of what they have done?
Thanks.
Sent from my SM-G991B using Tapatalk
-
Gazkoi Thanked / Liked this Post
-
02-05-2021, 07:59 AM #2
Hi mate,
To brick across the top you will probably need to use a small steel above the blade to take the brick weight and be able to remove the blade in the future.
Cheers
GazHobby and business gone but when you’re hooked you’re hooked.
Always happy to help!!
-
02-05-2021, 08:00 AM #3
I added a timber frame over the top of mine and marine plywood front that I sealed and tiled, you can't see that it is not the same as the rest...it works very well, though if I had the time at the time I would have likely got a door lintel or the like instead, maybe
Sent from my SM-G998B using Tapatalk
-
05-05-2021, 08:36 AM #4
As said above , you`ll need to support the brickwork that`s above the blade . Think of it like installing a house window , using a lintel .
Depending on the weight of brick above , you could use a steel or concrete lintel , or maybe a piece of 4x2 timber would suffice . Just dont fit it too tight , incase you need to remove it at some point .Colin
2500 Gallon Fibreglass Pond
Draco Solum 16 , 400l Bio Chamber
-
Cavester Thanked / Liked this Post
The Daily pond temp thread
Yep , forecast snow here ! Hoping so more money to be made gritting lol Sent from my SM-S918B...