Results 1 to 6 of 6
Thread: Pond liner and glass adhesive
-
23-01-2021, 06:59 PM #1
Pond liner and glass adhesive
Hi all,
First post, so apologies if it’s in the wrong section!
I’m updating my pond this year to add a window and make the pond slightly larger plus adding a base drain and gravity system.
The likelihood is the pond only needs to last 3/4 years and is of sleeper construction. I’d love to use an EPDM liner and wouldn’t question doing so if it was a longer term pond. My question is are there any sealants that can be used on the cheaper pvc liners for sealing the glass window in? I’m planning to seal it into a recess on the inner wall of the pond. Any suggestions would be appreciated.
Cheers
Harry
-
23-01-2021, 07:34 PM #2
Goldseal sticks like shit to every thing
Sent from my F5121 using TapatalkFreddyboy the legend
"we are water keepers first"
Johnathan
-
Frimley Koi keeper Thanked / Liked this Post
-
23-01-2021, 07:46 PM #3
Thanks mate, I’ve never had it not stick to anything just nervous as it’s a glass panel. I’ll run a trial
-
Ajm Thanked / Liked this Post
-
23-01-2021, 08:07 PM #4
Sure that's what most people use for glass matey
Sent from my F5121 using TapatalkFreddyboy the legend
"we are water keepers first"
Johnathan
-
26-01-2021, 10:21 AM #5
i used CT1 on both mine on sleeper pond,one in metal frame and large 4ftx3ft glass sat in recess,no leaks,my advice is put 3 beads of silicone on before fitting in place,,,,,,andi
-
26-01-2021, 10:25 AM #6
Another fan of CT1 here, not cheap but no good waterproof sealers are.
-
Ajm Thanked / Liked this Post
The Daily pond temp thread
Just kept 12 overnight for the first time. Hitting 12.8 in the daytime but bang on 12 first thing...