Welcome to Koi Forum. Is this your first visit? Register
Results 1 to 4 of 4

Thread: Pauls Pond

  1. #1

    Pauls Pond

    Hi All,
    First post in this forum after reading lots, I`m about the start my pond project and just wanted to run a few things by the experts, make sure I`m on the right lines, heres a few details:

    Pond internal dimensions – 4m x 2m x 1.2 deep
    Infinity window to one long side – external viewing dimensions 1.5 x 0.5
    700mm above ground built in blockwork on fat edge
    Stocked with 5 or 6, 20cm koi

    Build method – dig and fill 150mm footing with rebar rods, dig area inside footing and channel for 110mm bottom drain and return(s). “Dish” the internal area to lowest part at bottom drain. Build blockwork 700mm above ground.

    Filtration – 110mm bottom drain -> Eazypod -> pump -> UV -> mid water return

    First question is around the window, I`m thinking of laying the first course of block underneath the window to protrude internally by about 50mm, this will provide a “shelf” for the window to sit on then the second course run flush. Giving me a 100mm bottom lip to attach the glass (glass will be 200mm wider and 100mm deeper than opening). Then pva the blockwork where the glass will be in contact with it and then bond the glass to the blocks using this stuff: https://www.idealsealants.com/ideals...ive-300ml-p141.
    Once the sealant / adhesive has cured, fix bent straps https://www.screwfix.com/p/sabrefix-...m-5-pack/85398 to either side of the window securing it internally (for when the football hits it, I know there will be a ton of water holding it against the block work but for peace of mind and while its empty). Then bond liner to window using multiple beads of the same adhesive/sealant. Think this will work?

    pond window pic.PNG

    Also I`ve seen raised ponds with some sort of stainless and glass upstand fitted to the top, like the one in this video https://www.youtube.com/watch?v=HD6J6hTvv2U&t=197s I thought it may help deter the herons in my area, any ideas where to buy these?

    I` sure I`ll have loads more questions and I`ll post pics as I progress, thanks in advance!



  2. Thanks freddyboy Thanked / Liked this Post
  3. #2
    Extreme Koi Member Rank = Rokusai AlanF's Avatar
    Join Date
    Mar 2014
    Location
    Nr Stamford Lincs
    Posts
    425
    Thanks / Likes
    310
    Looks good. I would only seat the window on 50 mm lip, waste of glass to go more. Ideal Auto-Marine is the perfect choice of sealant. I built the block walls and just disc cut the rebate, painted it and sealed the window with 3-4 tubes of sealant. You need to have help lifting into position as the glass at 25mm thick weighs a lot! I also put two strips of rubber on the bottom lip to hold a gap while the seal sets, then removed and sealed later. Once it has fully cured it wont be going anywhere!!

  4. Thanks freddyboy Thanked / Liked this Post
  5. #3
    Senior Member Rank = Rokusai dbs's Avatar
    Join Date
    Jul 2020
    Location
    East Norfolk
    Posts
    438
    Thanks / Likes
    604
    Sounding like a good build, I look forward to seeing the progress Pauls Pond

    I can't comment on the glass as still trying to suss out my own Pauls Pond

  6. Thanks freddyboy Thanked / Liked this Post
  7. #4
    Thanks for the tip on the glass overhang Alan, Read through your pond build. Great job!

    I`m torn between:

    a) Make foundation for the blockwork thats going to be above ground level to sit on and leave the "inside" as mud and fit a liner (quicker and cheaper option and easier to form a concave to the BD,)

    b) Pour a slab and build up in blockwork from the bottom of pond then fiberglass (more expensive, take longer, look better) This seems to be the preferred option but other than a minor asthetics I can`t see much benefit

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT +1. The time now is 04:26 PM. Online Koi Mag Forum
Powered by vBulletin® Version 4.2.3
Copyright © 2020 vBulletin Solutions, Inc. All rights reserved.

vBulletin Improved By vBFoster® (Lite Version), © UltimateScheme, Ltd.