Results 1 to 16 of 16
Thread: Pressure pipe
-
19-06-2020, 06:30 PM #1
Pressure pipe
Does anyone now the best place to buy 160 pressure pipe and fittings from ?
-
freddyboy Thanked / Liked this Post
-
19-06-2020, 06:32 PM #2
-
freddyboy Thanked / Liked this Post
-
19-06-2020, 09:02 PM #3
I’ve bought from JBR in the past as they’ll deliver in 3m lengths whereas most won’t go beyond 1m or you have to collect. Also used Boddington for fittings
-
freddyboy Thanked / Liked this Post
-
19-06-2020, 09:15 PM #4
Pressure pipe
-
freddyboy Thanked / Liked this Post
-
19-06-2020, 09:44 PM #5
Arr mr big
I want to make a tube to put a heat exchanger in, also looking at using a small water tank as the flat sides will make the 4” inlets and outlets easier.
-
freddyboy Thanked / Liked this Post
-
19-06-2020, 10:59 PM #6
Ah..can you not get away with standard brown pipe? Bit pricey once you start getting that big whatever it’s made of but you might be able to get a short length from somewhere like eBay?
Sent from my iPhone using Tapatalk
-
freddyboy Thanked / Liked this Post
-
19-06-2020, 11:48 PM #7
You can buy it here.
https://www.pipestock.com/pvc
-
20-06-2020, 10:34 AM #8
Thanks John
will take a look.
-
freddyboy Thanked / Liked this Post
-
20-06-2020, 10:43 AM #9
I could Mr Big but it wouldn’t match
I have two outlets in my bio I would like to put the gravity UV on one so the flow is slower, but they are to close and not much room as it’s all 4” pipework.
i have now had the thought that I will use bigger pipe or a small upright storage tank and fit it directly to one outlet then have the UV on the other going into it.
i could then have the heat exchanger in this and the outlets to the pumps at the bottom using tank connectors.
what do you recon?
-
freddyboy Thanked / Liked this Post
-
20-06-2020, 04:34 PM #10
-
freddyboy Thanked / Liked this Post
-
20-06-2020, 04:54 PM #11
15571608975246864490134087575349
There you go will find one of the UV
-
freddyboy Thanked / Liked this Post
-
20-06-2020, 05:03 PM #12
So I recon the uv will come out of the right side via a 90 bend then come out of the bottom of the uv and back up to enter the tank the same height as the other outlet.
I will put another 4” outlet at the bottom to run to pump.
-
freddyboy Thanked / Liked this Post
-
20-06-2020, 06:06 PM #13
-
freddyboy Thanked / Liked this Post
-
20-06-2020, 06:12 PM #14
Miles away I’m near Reading Berkshire
will have a look still thanks.
looking at the costs I think I’m going to go with a vertical tank,
i have found one that is 24x24cm and 60cm deep
-
freddyboy Thanked / Liked this Post
-
22-06-2020, 09:18 PM #15
-
22-06-2020, 09:22 PM #16
I hope so as it will be all in 4” pipe stepping down to 3” for the pump and bakki
-
bigcarpchaser Thanked / Liked this Post
Best plants to remove Nitrate
pug has a very impressive veg filter on his pond, have a look at some of his his youtube videos....