Results 101 to 106 of 106
Thread: My Cuttlebrook fry.
-
23-11-2020, 10:10 AM #101
Very confused now
Allways used the Nt labs for years as you can do all the tests with it but never noticed the x bit.
Mine is a new kit so will go have a look.John
-
freddyboy Thanked / Liked this Post
-
23-11-2020, 11:02 AM #102
Just checked my test kit and it says No 3 and not No 3-N,so whether they have changed it I dont know.
John
-
freddyboy Thanked / Liked this Post
-
23-11-2020, 07:05 PM #103
Got a energy monitor plug delivered today so I can monitor exactly what the heater is using to maintain 23c with the trickle running. It’s only been plugged in for 5 hours but result was lower than expected.
It’s been running for 36 minuets and consumed 1.458 kwh so around 18p running costs. It’s been pretty cold here all day..
Will be interested in seeing what the cost will be overnight.
If your interested I’ll feed back.
Monitor was less than £20 for a pack of 2
Sent from my iPhone using Tapatalk
-
freddyboy Thanked / Liked this Post
-
23-11-2020, 10:17 PM #1042016 new 6000 gallon pond
https://www.koiforum.uk/pond-construc...ghlight=feline
-
freddyboy Thanked / Liked this Post
-
23-11-2020, 10:42 PM #105
-
freddyboy Thanked / Liked this Post
-
09-12-2020, 11:42 AM #106
Any updates on the Fry John?
Sent from my iPhone using Tapatalk
Running heater at low temp?
Covering the pond with polycarb should be enough to stop water temps dipping below 6C for the most...