Results 1 to 20 of 11962
Thread: The Daily pond temp thread
-
19-09-2012, 05:10 PM #1
The Daily pond temp thread
Daily Pond Temps - Created and Maintained by JohnKitching
[zoho]https://sheet.zoho.com/public/johnkitching/extreme-koi-pond-temps[/zoho]
Lets post our temps leading upto the winter.
Initial post
Size: 3000 gal
Heated: not presently (heater is set to 16 degrees)
Covered with: not presently (wood frame and 10mm polycarb covers standing by)
Foam lined: Yes
Above/Below Surface: 3.5' below + 3.5' above
Location: Romford
Filter insulated: Block built filter housing with wood and membrane roof
Then on a daily basis our temps
Todays Temp = 22.4 degrees
Time = 07:10
-
19-09-2012, 05:21 PM #2
Initial post
Main pond
Size: 5000 gal
Heated: Yes, (heater is set to 15 degrees)
Covered with: nothing at present.
Foam lined: nope
Above/Below Surface: 4.5 ft below
Location: Bursough,
Filter insulated: Block built with no cover at present.
Then on a daily basis our temps
Todays Temp = 13.5 degrees
Time = 05.15pm
Baby tank
Size: 800gl
Heated: yes, to 19d
Covered with: Polly tunnel
Foam lined: Fiberglass, with foam and then wood.
Above/Below Surface: 4.5 above ground
Location: as above
Filter insulated: Backi shower inside the tunnel, oase filtoclear not insulated as yet.
Then on a daily basis our temps
Todays Temp = 20d
Time = 05.15pmBlog, Koi, Everything.
http://kanundra.com/
http://mybook.to/TSK
http://author.to/DC
-
19-09-2012, 05:26 PM #3
Size: 2700 gal
Heated: no
Covered with: half covered with solguard pool cover
Foam lined: no
Above/Below Surface: 2.5' below + 2.5' above
Location: Grantham
Filter insulated: Nexus 210 not insulated
Todays Temp = 13.3 degrees
Time = 15:50
-
19-09-2012, 05:30 PM #4
Size: 6500 gal
Heated: 23.5c
Covered with: fish house
Foam lined: Yes
Above/Below Surface: 4' below + 3' above
Location: Lancashire
Filter insulated: inside fish house
Todays Temp = 23.5 degrees
Time = 17:30
-
ABN67 Thanked / Liked this Post
-
19-09-2012, 05:30 PM #5
Initial post
Size: 1700 gal
Heated: not presently (heater is set to 10 degrees)
Covered with: not presently (wood frame standing by - still to get polycarb)
Foam lined: No
Above/Below Surface: 1.5' below + 2.5' above
Location: Redditch
Filter insulated: Block built filter housing with wood and membrane roof
Todays Temp = 13.9 degrees
Time = 17:301630 Gallon raised pond
4" 'Avenue' bottom drain
Estro sieve
Econobead EB60 bead filter
Sequence 18000 pump, 6000 pump on skimmer line
Elecro 2kW in-line heater
Evolution Aqua 70 air pump
Standard wall skimmer
Hozelock Vorton 55watt UV
and some nice koi
-
19-09-2012, 07:48 PM #6
Size: 7900 gal
Heated: not presently (buying a 12.5kw heat pump now)
Covered with: polytunnel (saving up for polycarbonate sheeting)
Foam lined: 12mm
Above/Below Surface: 4.5' below + 1.5' above
Location: Harrow
Filter insulated: Block built filter housing with wood decking chambers and bead filters covered with bubble wrap
air pumps and waterfall still on
Fairly exposed garden location but planted some trees to break wind in years to come
Todays Temp = pond 17 degrees and air 16 drgrees
Time = 18:30
-
ABN67 Thanked / Liked this Post
-
19-09-2012, 08:21 PM #7
-
19-09-2012, 08:26 PM #8
-
19-09-2012, 08:27 PM #9
Size: 6000 gal
Heated: 23c
Covered with: uncovered
Foam lined: Yes
Above/Below Below
Location: Essex
Filter insulated: inside fish house
Todays Temp = 23 degrees
Time = 18.00
WLP
Size: 2200 gal
Heated: heaters not on at the moment
Covered with: uncovered
Foam lined: No
Above/Below Surface: below
Location: Essex
Filter insulated: no
Todays Temp = 17C degrees
Time = 17:30
Dave
-
Cocker123 Thanked / Liked this Post
-
19-09-2012, 08:30 PM #10
Size: 3500 gal
Heated: not presently (on the list to buy)
Covered with: wood frame and 10mm polycarb roof with close netting to sides but hope to make the sides wind proof
Foam lined: no
Above/Below Surface: 3.0' below + 1.5'' above
Location: Norwich
Filter insulated: Block built filter housing with wood and membrane roof
Then on a daily basis our temps
Todays Temp = 14 degrees
Time = 16.00
-
19-09-2012, 08:38 PM #11
Size: 6100 Gallons
Heated: No
Covered: No
Foam: No
Above/Below: 2foot above / 5 feet Below
Location: Chelmsford
Filter Insulated: inside pump house
Today Temp: 17.5 Deg
Time: 18-30
-
miles41 Thanked / Liked this Post
-
20-09-2012, 07:47 AM #12
Today temp: 19.8
Time: 07:45
-
20-09-2012, 08:56 AM #13
-
20-09-2012, 08:59 AM #14
If there's any interest I could set up a Google Drive (used to be called Google Documents) spreadsheet where we could all record our readings?
-
20-09-2012, 09:23 AM #15
-
20-09-2012, 09:36 AM #16
I've created a spreadsheet and put it here:
https://docs.google.com/spreadsheet/...EdWWmRreklHdXc
Anyone should be able to view it, if you want to edit it to add your own results pm me your email address and I'll add you.
If anyone doesn't want their data shown pm me and I'll remove you (and accept my apologies!)
-
20-09-2012, 09:41 AM #17
Sorry I should have explained. I bought a new thermometer yesterday as you guys were getting me worried.
The heater was reading 22.2 this morning. So I took the temp from the actual pond and thee temp was 19.8. I then took the temp from the nexus pump chamber and the temp was 22.0. So it looks to me that the medo pumping hot air into the nexus is acting like a heating device. The tubing that runs from the medo 120ltr to the nexus is always very hot indeed. So based in this I will need to assume that the pond water is always 3 degrees colder than the heater reading. This is the reason that my temps seemed excessive at first. So to heat at 16 degrees I will need to set the heater to 19. Anyone else have this kind if change between filter and pond?
-
20-09-2012, 01:38 PM #18
Initial post
Size: 2400 gallons
Heated: not presently (but have a 2kg heater to be fitted)
Covered with: not presently (wood frame and 25mm polycarb covers standing by)
Foam lined: No
Above/Below Surface: 1' below + 3' above
Location: Biggleswade
Filter insulated: Block built filter housing to be finished off
Then on a daily basis our temps
Todays Temp = 15 degrees
Time = 13.40
-
20-09-2012, 01:44 PM #191630 Gallon raised pond
4" 'Avenue' bottom drain
Estro sieve
Econobead EB60 bead filter
Sequence 18000 pump, 6000 pump on skimmer line
Elecro 2kW in-line heater
Evolution Aqua 70 air pump
Standard wall skimmer
Hozelock Vorton 55watt UV
and some nice koi
-
20-09-2012, 01:50 PM #20
Similar Threads
-
The complete build start to finish
By 0765peter in forum Pond Construction and Pond Build DiariesReplies: 31Last Post: 27-03-2014, 10:15 AM -
Kanundra
By TUTTY in forum General Koi Carp ChatReplies: 11Last Post: 12-03-2014, 09:05 PM -
For Sale 1kw Profi Style Heater
By muttley71 in forum Koi and Pond Equipment for SaleReplies: 0Last Post: 15-09-2013, 08:18 PM -
Water tests
By JimerC in forum General Koi Carp ChatReplies: 11Last Post: 18-08-2013, 10:39 AM -
Geeze!!!
By Kanundra in forum General Koi Carp ChatReplies: 1Last Post: 17-08-2013, 04:02 PM
Filtreau 25 & bio unit
I also agree with Al and John, mains water for cleaning the drum is the best way to go, providing...