Welcome to Koi Forum. Is this your first visit? Register
Results 1 to 8 of 8

Thread: usable pump?

  1. #1

    usable pump?

    hi folks

    I've acquired a really nice pump... 9000lph max so should be ideal for running my Eazypod (will have it turned down a litttle). Possible issue is... it only has 1" inlets and outlets. As I understand it I should be using 1.5" for my return lines. Any way around this? I guess fitting adapters to increase the size would be an option but will this restrict the flow? Or could I use 1" pipe?



  2. #2
    Extreme Koi Member Rank = Yonsai Andymadd's Avatar
    Join Date
    Mar 2011
    Posts
    248
    Thanks / Likes
    206
    Just step up to 1.5" as soon as you can and it should be fine.

    Andy

  3. Thanks clippo Thanked / Liked this Post
  4. #3
    Extreme Koi Member Rank = Sansai perks842's Avatar
    Join Date
    Dec 2012
    Posts
    134
    Thanks / Likes
    101
    Hey Clippo, what is the make and model, someone on here might be able to give you information on the pump and whether it worth it.

    It seems strange to have a 9000l per hour with 1" inlet/outlet.

    You would want to put 1" to 1.5" adaptors at a minimum.

    Depending on where the pump is going;
    In the pond = 1" to 1.5" on outlet up to the pod.
    Out on pond but before pod = 1"to 2" inlet 1" to 1.5" outlet.
    After pod = 1" to 1.5" either side.

    Sent from my ONEPLUS A6013 using Tapatalk

  5. Thanks clippo Thanked / Liked this Post
  6. #4
    cheers guys - it's a Sicce SDC 9.0. I've been sent it with a bespoke external use rated power supply and will be putting the wired controller in a mobile phone waterproof case (that said it's all under a covered pergola anyway). Don't think I've seen anyone else using them but I've got a couple powering my reef tanks and have been very impressed. It's wifi capable with alerts etc. My pond is only 6000l by the way so planning to run about 6000lph through the pod which I guess including losses would mean I'm running the SDC on about 70%

  7. #5
    anyone got a link to a 1 - 1.5" pump converter? I've googled a few different terms but not seeing anything obviously usable...

  8. #6
    Senior Member Rank = Jussai Gazkoi's Avatar
    Join Date
    Feb 2020
    Location
    Tividale
    Posts
    1,287
    Thanks / Likes
    2570
    Can you use a rubber coupler / reducer to attach the varying pipe and pump ?

    Cheers

    Gaz
    4,100 gallon pond, infinity window, duratec heater, aerated BD, 3 bakki showers full of BHM, amalgam UV, 3 Blue Ecoís, construction skimmer, trickle in/out, Oase Profi Drum and some very spoilt koi.

    3 separate grow on vats, one 1,600 gallon QT and a customer first business

    www.aurorakoi.co.uk

    www.facebook.com/aurorakoiuk

  9. Thanks clippo Thanked / Liked this Post
  10. #7
    Moderator Rank = Supreme Champion Feline's Avatar
    Join Date
    Aug 2013
    Location
    Somerset
    Posts
    5,871
    Thanks / Likes
    4192
    They come with a range of adapters apparently https://charterhouse-aquatics.com/sh...trollable-pump
    What's Included?
    • 1x SDC 9.0 Multifunction Pump
    • 1x SDC Controller
    • 1x SDC 9.0 Power Supply
    • 4x Silencer Feet
    • 2x 25mm Pipe Adapters
    • 2x 32mm Pipe Adapters
    • 2x 1" NPT Pipe Adapters
    • 2x 1 3/8" NPT Unions
    • 2x 1" - 1 1/4" Barbs

    I’m assuming you bought this second hand? Sounds like it might have NPT threads. Pond stuff doesn’t usually use that thread standard.

    If you can’t find anything suitable to attach to that you could as said just use a 1” to 1.5” rubber boot at each end, stick a load of PFTE tape round the thread so you can get a seal onto it.

    You might find that this pump struggles to get enough flow for your Pod. If it’s 4000 -9000 lph that might end up being in reality less than 6000 lph at full throttle due to resistances and heads.

  11. Thanks clippo Thanked / Liked this Post
  12. #8
    just doing some reading around and refreshing knowledge on head pressure etc.... and I noticed that this pump lists a max head of 7m compared to around 3m for the EA Varipump 10k. Am I missing something here or does this suggest the Sicce is essentially less prone to losing performance due to head pressure/friction? I guess I must be missing a trick...

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT +1. The time now is 08:31 AM. Online Koi Mag Forum
Powered by vBulletin® Version 4.2.3
Copyright © 2020 vBulletin Solutions, Inc. All rights reserved.

vBulletin Improved By vBFoster® (Lite Version), © UltimateScheme, Ltd.