Welcome to Koi Forum. Is this your first visit? Register
Results 1 to 13 of 13
  1. #1

    Error code 44 oase proficlear

    Hi. My drum is not very well.... has anyone experienced an error 44 code or could offer some advice? I bought it new so have the instructions but they arnt to clear as to what the cause is.
    Thanks for reading.



  2. #2
    Senior Member Rank = Rokusai Koiz's Avatar
    Join Date
    Oct 2019
    Location
    Cambs
    Posts
    474
    Thanks / Likes
    796
    Are you pump or gravity fed, and can you rotate the drum smoothly by hand?
    11,440L Raised Pond, BD, Oase ProfiClear, Bitron 55W, 2x10k Aquaforte Varios, Skimmer to Waterblade

  3. #3
    Senior Member Rank = Hassai Mikeh83's Avatar
    Join Date
    Dec 2019
    Location
    Oxford
    Posts
    848
    Thanks / Likes
    1539
    It would be good to know what specific drum it is along with confirming if it is pump or gravity Fed


    I assume you have followed what is in the manual for trouble shooting?


    Sent from my iPhone using Tapatalk

  4. Thanks freddyboy Thanked / Liked this Post
  5. #4
    sorry to hear your issue
    I would be in touch with the dealer as you brought it brand new.

  6. Thanks freddyboy Thanked / Liked this Post
  7. #5
    Hi ,thanks for your replies. It's gravity fed and with a superfish 20000 which has worked well for 2 years. The drum spins around ok with my hands and all seems in place.
    I read the Manuel and it said somthing about greasing but wasn't sure what it meant

  8. Thanks markini5, freddyboy Thanked / Liked this Post
  9. #6
    Senior Member Rank = Rokusai Koiz's Avatar
    Join Date
    Oct 2019
    Location
    Cambs
    Posts
    474
    Thanks / Likes
    796
    If this set up has been working well for 2 years and you've no change in flow rates or water heights, then I'd contact Oase Technical. Very helpful lot and they'll arrange a site visit if you can't fix it under their instructions if still in warranty.

    Did you register the product on the Oase site when you bought it? If not do you have the proof of purchase? I believe they'll want to see that before a site visit if that's necessary.

    Oase UK: 01603 710 339


    Sent from my SM-N910F using Tapatalk
    11,440L Raised Pond, BD, Oase ProfiClear, Bitron 55W, 2x10k Aquaforte Varios, Skimmer to Waterblade

  10. Thanks markini5, Mikeh83, freddyboy Thanked / Liked this Post
  11. #7
    Quote Originally Posted by dannyboy1978uk View Post
    Hi ,thanks for your replies. It's gravity fed and with a superfish 20000 which has worked well for 2 years. The drum spins around ok with my hands and all seems in place.
    I read the Manuel and it said somthing about greasing but wasn't sure what it meant
    i would 100% be in contact with Oase with the contact details provided by Koiz

    im not sure what you mean by grease, my design of drum filters dont require any grease

  12. Thanks Koiz, freddyboy Thanked / Liked this Post
  13. #8
    Senior Member Rank = Rokusai Koiz's Avatar
    Join Date
    Oct 2019
    Location
    Cambs
    Posts
    474
    Thanks / Likes
    796
    Yes the Oase drums do use grease ... they even come with a little tube of it in the kit! Tech told me it's really only used when installing the drum so not something required as 'maintenance' which rather contradicts the manual! Another reason to call them Error code 44 oase proficlear

    Sent from my SM-N910F using Tapatalk
    11,440L Raised Pond, BD, Oase ProfiClear, Bitron 55W, 2x10k Aquaforte Varios, Skimmer to Waterblade

  14. Thanks markini5, freddyboy Thanked / Liked this Post
  15. #9
    Quote Originally Posted by Koiz View Post
    Yes the Oase drums do use grease ... they even come with a little tube of it in the kit! Tech told me it's really only used when installing the drum so not something required as 'maintenance' which rather contradicts the manual! Another reason to call them Error code 44 oase proficlear

    Sent from my SM-N910F using Tapatalk
    thats crazy, sounds like they dont know much about the products they sell but that depends who picks up the other end of the phone .

  16. Thanks Koiz, freddyboy Thanked / Liked this Post
  17. #10
    Senior Member Rank = Rokusai Koiz's Avatar
    Join Date
    Oct 2019
    Location
    Cambs
    Posts
    474
    Thanks / Likes
    796
    Quote Originally Posted by markini5 View Post
    thats crazy, sounds like they dont know much about the products they sell but that depends who picks up the other end of the phone .
    Yup - as is always the case, luck of the draw who you get on the phone!!! Now I'm back at my PC, I can offer you another number for Oase: 01869 322 489. This is actually the one I normally use for them The other I found from a Google search on my phone earlier.
    11,440L Raised Pond, BD, Oase ProfiClear, Bitron 55W, 2x10k Aquaforte Varios, Skimmer to Waterblade

  18. Thanks markini5, freddyboy Thanked / Liked this Post
  19. #11
    Quote Originally Posted by Koiz View Post
    Yup - as is always the case, luck of the draw who you get on the phone!!! Now I'm back at my PC, I can offer you another number for Oase: 01869 322 489. This is actually the one I normally use for them The other I found from a Google search on my phone earlier.

    Normally use lol are they that bad? i know from 25 years of using their pumps, overpriced crap, had 3 new ones over the years never lasted much past their warranty period

    their drum filters look flimsy and massively overpriced

    though i am somewhat totally biased due to now able to make quality over engineered filters i researched as much as i could listened out for faults on other brands and 18 months experience with my first design then made my latest design

  20. Thanks Koiz Thanked / Liked this Post
  21. #12
    Senior Member Rank = Rokusai Koiz's Avatar
    Join Date
    Oct 2019
    Location
    Cambs
    Posts
    474
    Thanks / Likes
    796
    Quote Originally Posted by markini5 View Post
    Normally use lol are they that bad?
    their drum filters look flimsy and massively overpriced
    Error code 44 oase proficlearYes I can see how that must have sounded! The reason I had a hot line to Oase was because I had so many questions, whilst researching a new system, that I couldn't find online; the Tech Team were all working from home as it was the height of lockdown, but they were still really helpful.

    In fairness, I'm delighted with my Profi so far. Not sure how I'll feel if I have to carry out repairs as the Compact is - well -"very compact" Error code 44 oase proficlear, but the maintenance is fine and its much easier to keep clean than the Nexus+Draco with its removable screens.

    I got the Combi, Bitron Gravity and an extra fine set of screens, for a very good price (a tad over 2,300). That was about 1k cheaper than any other solution - of course I didn't know about your custom made drums then! Error code 44 oase proficlear

    I've had a lot of Oase kit over the years for both pond and aquarium, and none of its failed. What's the betting I've jinxed myself now having said that Error code 44 oase proficlear

    Sent from my SM-N910F using Tapatalk
    11,440L Raised Pond, BD, Oase ProfiClear, Bitron 55W, 2x10k Aquaforte Varios, Skimmer to Waterblade

  22. Thanks markini5, freddyboy Thanked / Liked this Post
  23. #13
    Quote Originally Posted by Koiz View Post
    Error code 44 oase proficlearYes I can see how that must have sounded! The reason I had a hot line to Oase was because I had so many questions, whilst researching a new system, that I couldn't find online; the Tech Team were all working from home as it was the height of lockdown, but they were still really helpful.

    In fairness, I'm delighted with my Profi so far. Not sure how I'll feel if I have to carry out repairs as the Compact is - well -"very compact" Error code 44 oase proficlear, but the maintenance is fine and its much easier to keep clean than the Nexus+Draco with its removable screens.

    I got the Combi, Bitron Gravity and an extra fine set of screens, for a very good price (a tad over 2,300). That was about 1k cheaper than any other solution - of course I didn't know about your custom made drums then! Error code 44 oase proficlear

    I've had a lot of Oase kit over the years for both pond and aquarium, and none of its failed. What's the betting I've jinxed myself now having said that Error code 44 oase proficlear

    Sent from my SM-N910F using Tapatalk
    they are very compact i agree with you , i steered well away from nexus/draco for a million reasons

    my price on the drum you brought is about 1k cheaper

    im only doing custom one off jobs for each customer that way they can specify space they have and install inlets and outlets where they wish to make installation simpler and more cost effective , size of external , i can make the drums much shorter lengths by increasing dia of drum massively , having much larger dia drums is my preferred design , and having the water line/level all the way upto the waste chute, surface area submerged 100% of the time is 460mm x 1300mm which is massive
    as the drum is way more submerged below the water level , it means i can pull greater flow rates via just 1 bottom drain and 1 skimmer line, cleaning times dramatically reduced to once every 2 hours now, and reduced water consumption with the high quality irrigation nozzle jets ive chosen for this, they are top branded ARAG each jet has a fine stainless steel filter inside

    spray bar polished 316 stainless steel 1.5mm thick walls , old drum as 20mm grey pressure pipe, but was sagging under its own weight
    i using high end food grade industrial Ceramic bearings/plastic carriers on all shafts , drum roller wheels (same) these never need greasing, and are designed to last forever and designed for much more heavy duty applications at much higher speeds .

    same with the drive system , well over engineered , main drum sprocket gear weighs over 600grams , 3/8 drive, all in 304 stainless steel, same with the chain, these are ment for CNC MACHINES LOL
    one way clutch bearing fitted, i had to design the bell housing and make it for it, its a sprag clutch designed for motorbikes lol fitted outside the drum for obvious reasons, 15mm shaft through, welded to a shaft joiner on the motor. motor is an high end parvalux 24v geared industrial unit 8rpm no chinese crap here. these motors alone cost over 200

    my old drum , the waste chute was made from old plastic guttering , installed level, but it wouldnt clear proper , over a few days the muck would build up causing the chute to drop at the rear so the waste would flow out properly ,

    new drum has a half circle chute 125mm wide angled a few degrees upwards into the drum meaning all the waste is captured and flows down and out the drum into the waste bin , its working as i want. its made from stainless steel 1.5mm thick walls, welded to a plate on the outside at an angle , i pre tried bearing my weight down on the waste chute once welded and pre trial fitted didnt move at all..

    mesh is 50 micron 316 , i can go much finer , my last mesh lasted 18 months on the old filter , no issues, so brought from same place again , but needed a custom size but was really cheap
    the mesh will last many years
    all parts i can replace no issues what so ever in sourcing spares

  24. Thanks freddyboy, perks842, Koiz Thanked / Liked this Post
 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT +1. The time now is 05:05 AM. Online Koi Mag Forum
Powered by vBulletin® Version 4.2.3
Copyright © 2020 vBulletin Solutions, Inc. All rights reserved.

vBulletin Improved By vBFoster® (Lite Version), © UltimateScheme, Ltd.