Results 1 to 4 of 4
Thread: tmc uv
-
15-02-2019, 09:19 PM #1
tmc uv
could you please help me
i have got a 55w tmc new uv with the blue plastic ends
but the person that set it up has fixed it to the wall
of the filter house they have screws both sides
looking at it cant get to the other side so im hoping
it slides off any advise
-
16-02-2019, 10:47 AM #2
Scubber,
The screws couldn't have been screwed into the wall if the access to them was blocked so there must be something that has been slid into its current position or the UV rotated from an initial position that allowed screws to be tightened to its current orientation. If that doesn't give you an idea as to how you can reach the screws, posting a picture would be helpful.
-
Frimley Koi keeper, Gray Thanked / Liked this Post
-
17-02-2019, 04:15 PM #3
the TMC ones have brackets underneath to sit them on,so as long as you have a valve either side you can isolate it and disconnect to replace bulb,well thats how it should be done,andi
-
17-02-2019, 08:01 PM #4
thank u every body i have done it
-
john1 Thanked / Liked this Post
The Daily pond temp thread
Yep , forecast snow here ! Hoping so more money to be made gritting lol Sent from my SM-S918B...