Results 1 to 7 of 7
Thread: Thread size
-
03-05-2019, 04:21 PM #1
Thread size
Hi anybody know what size fitting fits the superfish 20000 eco rc and where I can get them from.
-
03-05-2019, 04:22 PM #2
Ps it's not bsp
-
03-05-2019, 08:21 PM #3
I would say 1.5” as that is what the other models have, what kind of fitting are you after?
Sent from my iPhone using Tapatalk
-
03-05-2019, 10:45 PM #4
Well its 60mm but 2 inch wont quite fit, the thread pitch is wrong
-
04-05-2019, 05:40 AM #5
i had same problem. i put pdf tape on threads and bought 3 inch to 2 inch rubber boots on my pumps. been running now for 2 years without a leak lol
different pump but same problem.
-
anne Thanked / Liked this Post
-
07-05-2019, 09:15 AM #6
Could it be a 2" as it's a 20K LPH pump and other similar size pumps have 2" - unless you know other wise?
The problem is with pumps and things is they tend to have specific thread sizes and nothing else seems to fit so you can't screw a ball valve threaded union or a female to female threaded union joiner onto them. The other thing you have to watch out for is makes like Hozelock and Oase use 40mm as their 1.5" standard and most other makes use 38mm as their 1.5" standard so the same may apply to their 2" standard sizes?
-
07-05-2019, 11:34 AM #7
Pretty certain my 15000 took a 2".
The Daily pond temp thread
Still at around 17C, know what you mean about getting the covers off though :D it will be really...