Welcome to Koi Forum. Is this your first visit? Register
Page 1 of 38 12311 ... LastLast
Results 1 to 20 of 750
  1. #1

    Bigcarpchaser finally gets his bum into gear!

    Something happening....at last.
    Had approval from the financial controller for new pond but had to compromise on size. Apparently 6x3m was inappropriate for the size of the garden so settled for 3.8x3.8 with a corner chamfer.
    Should be around 3500g when done.
    Hole dug, muck away been today so my neighbours can stop rolling their eyes skywards as thatís about the 10th one weíve had since starting our ďGrand DesignsĒ project 2 years ago. Since then weíve been interrupted by the both of little Rory which scuppered things for 6 months but nearly done now. Was laying the patio and rebuilding the front garden wall where the previous spoil piled up and busted it however, the weather is rubbish for laying bricks and concreting so got the lads to dig me a pond to keep them warm.
    Construction is going to be pretty simple, concrete slab, trenchblock walls, small window on the chamfer facing the house. Will probably clad the blocks in timber to look like sleepers. Fibreglassing the inside
    4Ē bottom drain and skimmer from Jase of JBR (which has turned up today) into drum - K1 and drum - shower.
    Will be returning shower into K1 then all back to pond via low level returns in 2Ē. It looks ok on my computer screen so must be fine Mrs BCC has convinced me it wonít overflow.
    Filters in garage remote from pond and Iíve allowed to heat from my boiler but will take a view when Iím up and running how thatís going to work.
    No brickies for a while now as theyíre off on another job so it might be a painfully slow build but Iím in no rush.
    Might build the K1 chamber out of something myself if I get the time, if not then Iíll get JBR to knock up something.
    I have ďoffice handsĒ and a brain that doesnít communicate with them when it comes to doing anything remotely DIY so it will be a challenge to say the least. I can put together things from IKEA so how hard can it be?
    Was going to try airlifts but last minutes decision on location and size have scuppered this idea. PM coming your way Trace.
    Looking forward to conversing with Mark on here about his QK22 as thatís looking like the way Iím going and his setup is pretty much what Iím looking to emulate.


    I know a few of you appreciate a good ďmound of earthĒ photo


    Sent from my iPhone using Tapatalk



  2. Thanks freddyboy, DFC1980, JohnKitching, milaz, Tashyface, Jaycee027 Thanked / Liked this Post
  3. #2



    Sent from my iPhone using Tapatalk

  4. #3
    I’d like to thank everyone that has helped me since being on here, especially JK.
    You’re a grumpy old git mate but I like that Bigcarpchaser finally gets his bum into gear!


    Edit...the 4" waste isn't for my BD by the way, that's popping in to take waste from drum
    Last edited by bigcarpchaser; 28-02-2018 at 04:31 PM.

  5. Thanks freddyboy Thanked / Liked this Post
  6. #4


    Why my neighbours love us...this was a couple of days after we started our project...2 wagons, 1 loading the other one. This is in a little cul de sac where the oldies have a little moan about each other putting their bins out a day early.
    Plenty of curtain twitching gone on.
    Luckily the couple that are flipping g weird and have never spoken to us in the 3 years weíve been here have just moved out and a ďnormalĒ family have taken up residence.

    Daddies little ďhelperĒ
    His older brothers are useless


    Sent from my iPhone using Tapatalk

  7. Thanks freddyboy, John The Fish, Jaycee027 Thanked / Liked this Post
  8. #5
    nice one mate best of luck with the build. love seeing the little helpers get involved.

  9. #6
    i had the same with the neighbours even had them report me to the council and the police for not asking her permission to put all my soil outside my own house, then when i had the cement pumped for my base she blocked the lorry in with her car as i did not ask her if it was ok to have it done on a saturday morning

    she was outside in the snow yesterday washing her car lol

  10. Thanks Jaycee027 Thanked / Liked this Post
  11. #7
    Quote Originally Posted by bigcarpchaser View Post
    Iíd like to thank everyone that has helped me since being on here, especially JK.
    Youíre a grumpy old git mate but I like that Bigcarpchaser finally gets his bum into gear!


    Edit...the 4" waste isn't for my BD by the way, that's popping in to take waste from drum
    Iím not grumpy. I just understand how things are Bigcarpchaser finally gets his bum into gear!


    Sent from my iPhone using Tapatalk

  12. Thanks bigcarpchaser Thanked / Liked this Post
  13. #8
    Quote Originally Posted by JohnKitching View Post
    Iím not grumpy. I just understand how things are Bigcarpchaser finally gets his bum into gear!


    Sent from my iPhone using Tapatalk
    Lol thatís what I meant, people in the office building think Iím grumpy but actually Iím really happy...Iím just a realistically cynical grumpy happy person generally.
    Keep it simple and life is pretty straightforward eh?


    Sent from my iPhone using Tapatalk

  14. Thanks JohnKitching Thanked / Liked this Post
  15. #9
    Quick question as I know sod all about plumbing.
    Going with 2x2" returns. I might add in a "spare" while I'm about it, but am I right in thinking that if they're at opposing ends of the pond (pointing clockwise round the BD) I can run a 2" from the return pump then tee off to each individual return and balance with ball valves?
    My longest run is going to be around 8m and the shortest is 4m.(from pump...will pick one with some ooooomph obvioulsy). Will try and minimise the number of bends

  16. #10
    Quote Originally Posted by bigcarpchaser View Post
    Quick question as I know sod all about plumbing.
    Going with 2x2" returns. I might add in a "spare" while I'm about it, but am I right in thinking that if they're at opposing ends of the pond (pointing clockwise round the BD) I can run a 2" from the return pump then tee off to each individual return and balance with ball valves?
    My longest run is going to be around 8m and the shortest is 4m.(from pump...will pick one with some ooooomph obvioulsy). Will try and minimise the number of bends
    Yes. Just make sure at least one is always fully open otherwise youíre putting unnecessary load on the pump.
    Youíll still be able to balance the flow.
    If you can figure out which one will have the highest flow you only need one valve on that one.


    Sent from my iPhone using Tapatalk

  17. Thanks bigcarpchaser, freddyboy, lee63 Thanked / Liked this Post
  18. #11
    Getting somewhere now!

    Have a load of 12mm steel rods in the corners. Anchored in with resin just in case.
    Toolstation had 1m long SDS drill bits for £25 which were useful.
    Need to level the garden up now


    Sent from my iPhone using Tapatalk

  19. Thanks lee63 Thanked / Liked this Post
  20. #12
    Senior Member Rank = Gosai Brandlin's Avatar
    Join Date
    May 2018
    Location
    North Wales
    Posts
    272
    Thanks / Likes
    266
    any progress?

  21. #13
    Quote Originally Posted by Brandlin View Post
    any progress?


    Pergola done. return pipework laid, skimmer pipework going in tomorrow.
    Going to celotex at weekend, glassing being done 30th.
    Nothing too exciting at the moment



    Sent from my iPhone using Tapatalk

  22. Thanks Ajm, freddyboy, voodoo_15_uk, milaz Thanked / Liked this Post
  23. #14
    Celotex done. Dusty, horrid job.


    Sent from my iPhone using Tapatalk

  24. Thanks freddyboy, JohnKitching, voodoo_15_uk, Jaycee027 Thanked / Liked this Post
  25. #15
    Looking good mate.

    Sent from my SM-G925F using Tapatalk

  26. Thanks bigcarpchaser Thanked / Liked this Post
  27. #16
    Extreme Koi Member Rank = Yonsai muttley's Avatar
    Join Date
    Aug 2011
    Posts
    213
    Thanks / Likes
    35
    Didn't realise you could glass directly to the foil on a celotex/kingspan sheet. Anyone else done this?

  28. #17
    Quote Originally Posted by muttley View Post
    Didn't realise you could glass directly to the foil on a celotex/kingspan sheet. Anyone else done this?
    Most ďcelotexĒ type Insulation has foil both sides these days I believe.
    I had to check this too...looked through a few build threads to ensure I wasnít being dumb




    Sent from my iPhone using Tapatalk

  29. Thanks freddyboy Thanked / Liked this Post
  30. #18
    Extreme Koi Member Rank = Gosai koicarpus's Avatar
    Join Date
    Jul 2012
    Posts
    267
    Thanks / Likes
    201
    Yes I have, no problems.
    Build's looking good. keep up the good work.

  31. Thanks bigcarpchaser, freddyboy Thanked / Liked this Post
  32. #19
    Senior Member Rank = Grand Champion voodoo_15_uk's Avatar
    Join Date
    Aug 2012
    Location
    York
    Posts
    4,360
    Thanks / Likes
    2821
    Yes, if you fibreglass onto the foam the stuff used to put the glass on can react with it and melt it


    Sent from my iPhone using Tapatalk

  33. Thanks freddyboy Thanked / Liked this Post
  34. #20
    Glassing done. Not that Iíve got anything to compare it to but it looks pretty good to me!
    Ace job by Bob Hart

    Tapatalk now wonít let me insert photos for some reason.
    Any clues anybody?


    Sent from my iPhone using Tapatalk

  35. Thanks freddyboy Thanked / Liked this Post
 

 
Page 1 of 38 12311 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT +1. The time now is 04:28 AM. Online Koi Mag Forum
Powered by vBulletin® Version 4.2.3
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.

vBulletin Improved By vBFoster® (Lite Version), © UltimateScheme, Ltd.