Results 1 to 7 of 7
Thread: Nexus 200 over flow kit (type 2)
-
20-08-2019, 12:34 PM #1
Nexus 200 over flow kit (type 2)
Hi
any one have an overflow kit for a Nexus 200 they would sell ?
Thanks
-
20-08-2019, 02:40 PM #2
you could make one with a couple of tank connectors and pipe cheaper,is it the oveflow from easy to outside or like i have a small tank connector on outer chamber to waste,,,,,andi
-
freddyboy Thanked / Liked this Post
-
20-08-2019, 08:13 PM #3
Thanks Andi
-
freddyboy Thanked / Liked this Post
-
20-08-2019, 10:50 PM #4
Hi Andy,
is is this a straight forward modification to carry out?
many thanks Alan
-
freddyboy Thanked / Liked this Post
-
21-08-2019, 10:08 AM #5
hi alan,mine is just a 22m tank connector from wickes through the wall of outer chamber,then a pipe from that to waste on outside and a bend with a short piece of pipe on inside,i didnt solvent the inner bend which allows me to set my height by moving it up or down,it has a stop end on it which i cut a hole in so the k1 couldnt escape,,,,andi
-
freddyboy Thanked / Liked this Post
-
21-08-2019, 06:15 PM #6
Hi Andi, many thanks for this information, I will do this at the weekend, saves spending out on the EA kit.
-
freddyboy Thanked / Liked this Post
-
22-08-2019, 12:53 PM #7
you can actually do the same with 3" from the inner to outer chamber for an overflow incase the easy section blocks,just cut hole in wall between,mount tank connector and put a bend on easy side that you can raise and lower,,,andi
-
freddyboy Thanked / Liked this Post
The Daily pond temp thread
Yep , forecast snow here ! Hoping so more money to be made gritting lol Sent from my SM-S918B...