Results 1 to 13 of 13
Thread: Part of Valve
-
16-03-2019, 09:28 PM #1
Part of Valve
Random question but looking for the screw piece and flange for 2 ball valves, 1.5 and 3/4 inch.
To fit on here
[IMG]blob:https://www.koiforum.uk/b349c83a-33d7-42cb-b313-f6b694d11d13[/IMG]
if anyone has some?
-
16-03-2019, 09:30 PM #2
Picture attached now, I hate technology!
Last edited by Djstiles999; 16-03-2019 at 09:33 PM.
-
john1 Thanked / Liked this Post
-
16-03-2019, 09:43 PM #3
-
Djstiles999 Thanked / Liked this Post
-
16-03-2019, 10:51 PM #4
Much appreciated
-
john1 Thanked / Liked this Post
-
17-03-2019, 12:52 PM #5
rubber connectors work well,,,,andi
-
john1 Thanked / Liked this Post
-
17-03-2019, 01:16 PM #6
That was plan A but I thought I’d ask, you never know and if someone had the spares it’s a far tidier solution
-
john1 Thanked / Liked this Post
-
17-03-2019, 01:34 PM #7
Attachment 27149
Hi DJ,this is the only thing I could find,it is a solvent straight connecter and it says
PVC D 63 PN 1.6
think it is too big for you.John
-
17-03-2019, 01:38 PM #8
-
19-03-2019, 06:08 PM #9
I think what you want is a Female to Female plain union in 1.5" and 3/4" and then just use the female threaded half to screw onto the ball valves. I looked on Coastal Koi and they do 1.5" and 1" for pressure pipe but not 3/4" I'm not saying they don't exist but may just that Coastal Koi don't sell them. I'm fairly sure that when I fitted the waste hose to my Eazy Pod I just robbed the female threaded side of either another ball valve or a female to female plain union and it screwed straight on no problem.
Will have a check later to see if they are interchangeable as I'm sure I've got some spares in the garage to try.
-
21-03-2019, 01:24 PM #10
I finally got round to checking the valves and fittings last night and found that the female to female unions don't fit so you will need a set of fitting off the correct sized valves which probable means searching ebay or buying some new glands.
-
Djstiles999 Thanked / Liked this Post
-
21-03-2019, 07:03 PM #11
Many thanks for looking. Back to plan A - Rubber boots
-
Frimley Koi keeper Thanked / Liked this Post
-
21-03-2019, 07:12 PM #12
Sorry I was sure I had used the female to female fittings so tried both 1.5" & 2" on the 1.5" valve I had.
You will probably find that the price of a new valve is very similar to the price of a rubber boot for the smaller valves so may be worth checking it out as it will be a better fit if you can get the right parts?
-
01-04-2019, 08:19 PM #13
-
freddyboy, Frimley Koi keeper Thanked / Liked this Post
Aquaforte Dm vario 20000 pumps
Still for sale. Postage available for cost Sent from my SM-S901B using Tapatalk