Results 1 to 20 of 26
-
22-08-2017, 08:26 AM #1
Modification Disk for Easy pod / Eazy Pod
I'm hope I'm ok posting in this for sale section but this entire little venture started from these forums:
I was looking to improve filtration from the easy pod. It seemed silly that the K1 was not compact and loose floating around and so I have created a disk that pushes the K1 into the filter, compacts it by a lot and significantly improves the filtration.
I made a prototype in my workshop and posted it on here, link below. I got a lot of messages on here, email and YouTube asking for a disk but time would be too great to hand cut each one. I also improved the original design by adding handles so that you can easily clean the filter without any mess. It uses two plastic handles that sit over the edge of the easy pod and lift the disk to allow the k1 to clean during boiling,
I've had 25 cut in this initial first batch which I am selling for £42.95 each which includes postage and packaging to anywhere in the UK. I have sold near half of these now but still have some left. I am taking full payment now but they will be sent out the first week of September at the latest.
If if you would like to order one, get in touch or visit the PayPal link here:
Raynerd.co.uk
-
RomfordPaul, Goonerharwood Thanked / Liked this Post
-
23-08-2017, 02:16 PM #2
Afternoon Chris, love the idea and have just ordered one.
You have probably been asked this already, but are you looking at making one for the Nexus 200 / 300's as well?
Would possibly just need slightly different brackets to "grasp" the side of the Eazy's.
Paul
-
Goonerharwood, craynerd Thanked / Liked this Post
-
24-08-2017, 05:24 PM #3
Hi Paul, thanks for comment.
If people are happy and the feedback positive, I will indeed be looking to make one for the 200s / 300s if I can find dimensions and access to one for measurements.
Only a few more of these first batch left for sale so clearly a big interest. Thank you for those that have purchased so far. I've had confirmation that the plastic is ready to collect Wednesday so I should have these posted Thursday, Friday next week at the latest!
Chris
-
RomfordPaul Thanked / Liked this Post
-
24-08-2017, 08:57 PM #4
Defo be interested in one for the 300 good job Chris
Colin
-
25-08-2017, 10:21 PM #5
Can you remove the disc easily enough? I find I have to get into the pod about every fortnight to vacuum out sludge that builds up in the outer chamber.
-
31-08-2017, 08:44 PM #6
Hi
Sorry I missed this! Yes, remove the overflow section and lift it out. Although if it's the outer section the disk won't heed removing as it just fits in the inner centre section.
Chris
-
04-09-2017, 09:49 PM #7
Thanks to everyone who has purchased one of these. All orders were posted last Saturday!
I ended up with 25 rather than 20 and still have another three for sale all boxed and ready to go. Let me know if you want one.
Cheers
chris
-
23-03-2018, 02:12 AM #8
I've been steadily selling my last batch of these over winter. I've just had a new batch cut and ready to post. So just a little bump to this thread back to the top. Please get in contact if you are interested or visit my site or eBay to purchase.
All the the best and thanks for the support so far.
-
freddyboy Thanked / Liked this Post
-
23-03-2018, 08:45 AM #9
-
23-03-2018, 10:11 AM #10
Hi Craynerd ,
Have been able to do anything yet for the Nexus 200/300 series yet?
Colin
-
freddyboy Thanked / Liked this Post
-
04-05-2018, 09:35 PM #11
Sadly not. I just don’t have a filter to design from!
Just got a new batch of these made.
A bump back to the top.
They will be back on flea bay later in the week but giving to priority to forums first. All feedback positive. Cheers
chris
-
freddyboy Thanked / Liked this Post
-
09-05-2018, 07:00 AM #12
Morning guys, sent all orders out last night and I’m down to my last 10 again before a new batch is made. Please get in contact if you are interested in one. Cheers
-
freddyboy Thanked / Liked this Post
-
05-06-2018, 03:26 PM #13
Hi Chris,
This is brilliant. I have just watched your videos on YouTube and I’m very impressed.
I’m wondering if you have any left and If so, are you able to ship to Brisbane, Australia?
Thanks,
Ozmo
-
05-06-2018, 11:45 PM #14
Hi Ozmo
Thanks for your interest. I’ve sent you a pm.
Chris
-
ozmo Thanked / Liked this Post
-
06-06-2018, 12:12 AM #15
Thanks Chris. Much appreciated.
-
freddyboy Thanked / Liked this Post
-
07-06-2018, 12:05 PM #16
-
craynerd Thanked / Liked this Post
-
10-06-2018, 04:32 AM #17
Chris - I’m not sure if there is an issue with you not receiving my PMs but I have sent funds on the 6th via PayPal. Please confirm ASAP as I’m going abroad soon and need to plan for an ETA. Thanks!
-
craynerd Thanked / Liked this Post
-
10-06-2018, 05:48 AM #18
I also just watched your video on converting the Easypod to gravity fed. Thanks for that. I now feel confident in changing it up. https://youtu.be/cXWIvDMs3U4
-
10-06-2018, 07:00 AM #19
Sorry Ozmo, for some reason I get notifications on this thread but not pm. Please always use email if you really need me. However, on this occasion, I’ve pm,d you.
-
08-03-2019, 10:22 PM #20
Evening
the modification disk is for sale again, ready to be posted week commencing 18th March. I am having a batch of 30 made, there are about 12 left if anyone wants one. I have a stuck a few on eBay and they can be purchased cheaper from my website.
cheers
chris
Best plants to remove Nitrate
pug has a very impressive veg filter on his pond, have a look at some of his his youtube videos....