Results 1 to 14 of 14
-
13-10-2019, 04:16 PM #1
Can anyone point me in right direction for mpde pipe and fittings
I want to use mpde pipe and fittings from my outside tap to purifier inlet it’s sn adaptor to fit my tap I’m struggling to find its 3/4 inch male thread on the Tao but threads are very short in length on it anyone recomend out the mpde pipe is 20 mm I think
Sent from my iPhone using Tapatalk
-
charco123 Thanked / Liked this Post
-
13-10-2019, 04:59 PM #2
-
Frimley Koi keeper, freddyboy Thanked / Liked this Post
-
13-10-2019, 05:07 PM #3
Thanks they are way too big 90 mm fittings what I’m after is a fitting female thread that screws onto my Tao 3/4 inch that allows me to use the 20 mm pipe which I think I’ve managed to find but the threaded outlet on outside tap is very shallow just hope there’s enough to screw onto
Sent from my iPhone using Tapatalk
-
13-10-2019, 05:17 PM #4
https://www.gasandwaterpipelines.co....-fittings.html
Same as previous top link but looked further up the list of sizes
You may find the other links are the same - just need to select the correct size from the available sizes
-
gravesendkoi, freddyboy Thanked / Liked this Post
-
13-10-2019, 07:24 PM #5
Can anyone point me in right direction for mpde pipe and fittings
Thank you that’s great ordered one to thread onto tap and others for solednoid valve for auto top up
Sent from my iPhone using Tapatalk
-
-
13-10-2019, 08:20 PM #6
Sorry for mis reading the size, but glad I tried to point you int the right direction, although just 70mm too big.
-
Frimley Koi keeper, freddyboy Thanked / Liked this Post
-
13-10-2019, 08:48 PM #7
Also ordered one of these to thread onto tap to extend the length of the tap threads so it tightens on better52146EFC-4A91-4E12-B033-89C745262AC6-4687-000002B736701383.JPG
Sent from my iPhone using Tapatalk
-
freddyboy, Frimley Koi keeper Thanked / Liked this Post
-
14-10-2019, 05:48 PM #8
-
freddyboy Thanked / Liked this Post
-
14-10-2019, 05:49 PM #9
Thanx yeh I will do
Sent from my iPhone using Tapatalk
-
Frimley Koi keeper, freddyboy Thanked / Liked this Post
-
14-10-2019, 06:15 PM #10
-
freddyboy Thanked / Liked this Post
-
14-10-2019, 06:39 PM #11
Ha ha no even a drip is too much if all fails I will just put the blue water hose and brass fittings back on one of which drips every time you disconnect one of these and push it back on it drips hence the reason I want to try something else outlet side on purifier into drum is on 1 inch pressure pipe 1 inch tank connector in drum dirty side
Sent from my iPhone using Tapatalk
-
Frimley Koi keeper, freddyboy Thanked / Liked this Post
-
14-10-2019, 07:46 PM #12
Sounds like a plan Dave, good luck
Once sorted can you put some photos on here please? I'm in the process of doing something similar with 20mm poly pipe supplying my filter top up system.
-
freddyboy Thanked / Liked this Post
-
18-10-2019, 05:32 PM #13
Will do I’ve got tank connector fitted into drum inlet all ready to join onto lad coming Sunday night to take a look at tap and hopefully pipe onto it
Sent from my iPhone using Tapatalk
-
23-10-2019, 05:27 PM #14
Phase 1 done Frimley tank connector in side of drum all piped up connected to purifier outlet on pressure pipe
Phase 2 will hopefully be sorted tomorrow piping upto purifier inlet on 20 mm poly pipe and fittings once this is completed il add pics
Sent from my iPhone using Tapatalk
The Daily pond temp thread
Still at around 17C, know what you mean about getting the covers off though :D it will be really...