Welcome to Koi Forum. Is this your first visit? Register
Results 1 to 8 of 8
  1. #1
    Senior Member Rank = Rokusai smartin's Avatar
    Join Date
    Mar 2019
    Location
    East Sussex
    Posts
    389
    Thanks / Likes
    717

    Some more winter preperation

    Good morning ladies and gents,

    One side of my pond was not rendered like the remainder of the pond so now having learnt so much on here (thanks everyone) I now know that its far from ideal for winter insulation purposes so I went and purchased 2 Ecotherm 50mm panels (1200x2400 each) the very helpful guys from Aylesford timber cut them down to size so I could completely cover this side wall 80cm x 350cm x 50mm, using aluminium tape I joined the two panels together and also taped up all four sides of the whole section and using some clear "sticks like" adhesive managed to get the panel attached to the pond outer wall, upon inspection this morning it looks like the adhesive has taken well to the foil and brickwork so happy days this will help to keep the frost from penetrating the pond on that side, also added some finishing touches to the window using some pipe insulation around the window to help seal it up at night which I am putting on each night now, all looks quite cosy for them, the things we do for our fish..... cheers Steve.


    Attached Images Attached Images

  2. Thanks john1, RS2OOO Thanked / Liked this Post
  3. #2
    Extreme Koi Member Rank = Grand Champion john1's Avatar
    Join Date
    Aug 2013
    Location
    N.Wales.
    Posts
    4,915
    Thanks / Likes
    7661
    Looks a good job Steve,your koi are very lucky to have a guy like you careing for them.
    John

  4. Thanks smartin, RS2OOO, freddyboy Thanked / Liked this Post
  5. #3
    Member Rank = Nisai f15hie's Avatar
    Join Date
    Jul 2019
    Location
    Mudway Towns :)
    Posts
    62
    Thanks / Likes
    167
    Looking good, nice and toasty
    When Iím dead I hope my Mrs doesnít sell my fishing gear for what I told her they cost!

  6. Thanks smartin, RS2OOO, freddyboy Thanked / Liked this Post
  7. #4
    Senior Member Rank = Mature Champion RS2OOO's Avatar
    Join Date
    Feb 2018
    Location
    South East
    Posts
    2,319
    Thanks / Likes
    5074
    Such a neat job mate.

    Cutting that insulation so straight can't have been easy either, its a messy job too. When I cut some my garden looked completely trashed, the stuff gets everywhere.

  8. Thanks freddyboy, smartin Thanked / Liked this Post
  9. #5
    Senior Member Rank = Supreme Champion freddyboy's Avatar
    Join Date
    Mar 2016
    Posts
    7,139
    Thanks / Likes
    10150
    nice neat job mate

  10. Thanks smartin, Scamp Thanked / Liked this Post
  11. #6
    Senior Member Rank = Rokusai smartin's Avatar
    Join Date
    Mar 2019
    Location
    East Sussex
    Posts
    389
    Thanks / Likes
    717
    cheers guys, my DIY skills are awful, Aylesford timber has helped me no end as they have used there large mill saw to cut some pieces to size for me, i have just had to add foil tape, trim and cut where needed to make fit.... Steve.
    Last edited by smartin; 08-10-2019 at 10:42 AM.

  12. Thanks freddyboy, john1 Thanked / Liked this Post
  13. #7
    Member Rank = Nisai f15hie's Avatar
    Join Date
    Jul 2019
    Location
    Mudway Towns :)
    Posts
    62
    Thanks / Likes
    167
    Wise choice, and it looks the dogs danglies

    if your not comfortable doing DIY and confident of a good finish. I would every time go to a place with the options to cut board/planks to size. Just built 2 shelf units in Mrs wardrobes, I need more space and racking she said, So went to B&Q and had them cut all shelves and uprights cut to size on big cutting machine, then just took it home and screwed together. All plumb and same size. All for the same price of full contiboard sheets which were exact measurements.

    Once you have finished your pond fancy popping over and insulating my garage
    When Iím dead I hope my Mrs doesnít sell my fishing gear for what I told her they cost!

  14. Thanks freddyboy, smartin, john1 Thanked / Liked this Post
  15. #8
    Senior Member Rank = Rokusai smartin's Avatar
    Join Date
    Mar 2019
    Location
    East Sussex
    Posts
    389
    Thanks / Likes
    717
    Quote Originally Posted by f15hie View Post
    Wise choice, and it looks the dogs danglies

    if your not comfortable doing DIY and confident of a good finish. I would every time go to a place with the options to cut board/planks to size. Just built 2 shelf units in Mrs wardrobes, I need more space and racking she said, So went to B&Q and had them cut all shelves and uprights cut to size on big cutting machine, then just took it home and screwed together. All plumb and same size. All for the same price of full contiboard sheets which were exact measurements.

    Once you have finished your pond fancy popping over and insulating my garage
    lol, I am all insulated out mate, best not do too much more as the wife will start to write me a list all the time she thinks I am rubbish at DIY the less hassle I get, talking of shelves that's something I have to sort out in my kitchen cupboard !

  16. Thanks john1, freddyboy Thanked / Liked this Post
 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT +1. The time now is 10:26 PM. Online Koi Mag Forum
Powered by vBulletin® Version 4.2.3
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.

vBulletin Improved By vBFoster® (Lite Version), © UltimateScheme, Ltd.