Results 1 to 5 of 5
Thread: AquaForte Wiring
-
20-08-2019, 08:21 PM #1
AquaForte Wiring
Hi All,
I have purchased an AquaForte 10,000 vario.
I would like to put a UK 3 pin plug on it and I have been told it’s quite simple, but before I make the cut could someone confirm that it is? Will I see 3 wires the same colour as normal or will they be different? And if so, how will I know which ones go where?
Thanks
Adam
-
20-08-2019, 08:56 PM #2
Hi Adam,
I have a 30k vario pump and I put a std 3pin plug on it with no issues at all. I think colouring would have been the same or I’d have remembered.
Obviously don’t cut the wire that goes from the pump to the control module though!
David
-
20-08-2019, 09:38 PM #3
I have just done this on a 20000 vario, it was straight forward and wiring was coloured as per UK - brown, blue, green/yellow.
Actually it amazes me they can be sold for the uk market without a uk plug.
-
21-08-2019, 01:39 AM #42016 new 6000 gallon pond
https://www.koiforum.uk/pond-construc...ghlight=feline
-
freddyboy Thanked / Liked this Post
-
22-08-2019, 10:40 PM #5
-
freddyboy Thanked / Liked this Post
Every day feeding container?
Good shout, I'll have a look at Takazumi :)