Results 1 to 6 of 6
-
15-06-2019, 10:19 PM #1
Anyone familiar with the queni koi drum control panel
I need to alter the cleaning time on my queni 15 drum it’s only cleaning for 10 seconds and still dirt on screens it has 2 dials one for cleaning time and a blue one for time duration I’ve uploaded a pic It’s set at 20 secs and the blue dial is between 10 and 15 I’ve uploaded a pic do you turn the dials clockwise and what’s the next setting after 20 seconds if it’s 1 minute and I set it at this do I have to adjust the blue dial as well so it’s higher any help appreciated enclosed is a picture of how it’s set now IMG_0046.jpg
Sent from my iPhone using Tapatalk
-
16-06-2019, 06:17 PM #2
The top rotor is the range which is set to 1 to 20 seconds, the blue rotor is the set time which is set to about 11 seconds, the next range is 0.1 to 2 minutes
-
freddyboy Thanked / Liked this Post
-
16-06-2019, 07:47 PM #3
you turn the middle dial up to 20 to get it to run for 20 seconds, and if you need longer you need to turn the top dial (most likely 2min) and then the middle dial will be 2 minutes split into 20 segments.
so every number on the middle dial will be 6 seconds (10 = 1 minute)
-
freddyboy Thanked / Liked this Post
-
16-06-2019, 10:11 PM #4
Anyone familiar with the queni koi drum control panel
Thank you that’s great guys so if I set the dial to 2 mins and the blue dial to say 15 it should clean for 1 minute 30 seconds ior if it’s at 2 miins and blue dial is at 10 it will clean for a minute
Sent from my iPhone using Tapatalk
-
17-06-2019, 09:39 AM #5
Sorted thank you to everyone who replied for there help
Sent from my iPhone using Tapatalk
-
freddyboy Thanked / Liked this Post
-
17-06-2019, 07:57 PM #6
Got it set now doing 1 minute and what a difference screens clear and no crap Settling in waste tray
Sent from my iPhone using Tapatalk
Running heater at low temp?
Covering the pond with polycarb should be enough to stop water temps dipping below 6C for the most...