Results 1 to 10 of 10
Thread: Boxweld liner supplier
-
13-03-2019, 04:32 PM #1
Boxweld liner supplier
Hello
This summer i am upgrading my pond and one of the upgrades is to go with a made to measure boxweld liner.
Can Anyone recommend a good supplier please who I can submit my drawings to.
thanks
Jim
-
andikoi Thanked / Liked this Post
-
13-03-2019, 04:45 PM #2
Most suppliers obtain box liners from Gordon Low who only sells to the trade, so whichever supplier you go with you're likely to end up with the same product.
For me, the cheapest quotes come from Atlantica Gardens.
I have never ordered a liner requiring drawings, mine have always been straight forward square / rectangle measurements, but I don't see that aspect making much difference whoever you go through.
-
13-03-2019, 05:10 PM #3
Think that’s who I went with if I remember right, it was good service too and didn’t cost the earth which was great
Sent from my iPhone using Tapatalk
-
13-03-2019, 05:21 PM #4
Got ours from absolute koi, not sure where he ordered it from but it fit like a glove
-
13-03-2019, 06:42 PM #5
thank you for the replies great stuff
Im after an oval ish shape but going to do some detailed drawing to my mate who will then do me a CAD model
cheers
Jim
-
13-03-2019, 09:22 PM #6
mine came from here,its an epalyn one and felt a lot stonger and easier to handle than my previous butyl one,,,,andi https://www.pondlinersonline.co.uk/
-
14-03-2019, 06:41 PM #7
thanks Andi
will look into them too . i take it on the page you clicked on the tailoured to fir section.
Jim
-
14-03-2019, 10:41 PM #8
Yes then give measurements and shape...andi
-
15-03-2019, 08:59 AM #9
I also got mine from pondlinersonline, very pleased with it and very quick delivery time.
-
30-03-2019, 06:49 PM #10
I used flexible lining products FLP and they offered a great service I supplied a template of the pond bottom and a week later it turned up and fitted like a glove and was reasonably priced too
Sent from my iPhone using Tapatalk
-
JimJones Thanked / Liked this Post
The Daily pond temp thread
Yep , forecast snow here ! Hoping so more money to be made gritting lol Sent from my SM-S918B...