Results 1 to 10 of 10
Thread: Queni drum sensor
-
11-05-2018, 05:26 AM #1
Queni drum sensor
On my queni drum I noticed there's an extra hole higher up that's unused behind plate that holds float in place can this be used just curious
Sent from my HTC One using Tapatalk
-
11-05-2018, 05:36 AM #2
- Join Date
- Oct 2014
- Location
- East riding of yorkshire
- Posts
- 3,881
- Thanks / Likes
- 3865
Yes mate, its so you can adjust the sensor to suite your running/desired water levels etc..
If you look there is the mounting holes on both clean and dirty sides so you can run pump fed or gravity fed
Sent from my iPhone using TapatalkIts always a work in progress
-
11-05-2018, 05:40 AM #3
-
11-05-2018, 05:41 AM #4
- Join Date
- Oct 2014
- Location
- East riding of yorkshire
- Posts
- 3,881
- Thanks / Likes
- 3865
Queni drum sensor
No problem dave, curious my side now which qk drum have you got?
Mines the 22 and pump fed (for now )
Sent from my iPhone using TapatalkIts always a work in progress
-
11-05-2018, 06:37 AM #5
-
freddyboy Thanked / Liked this Post
-
11-05-2018, 06:48 AM #6
-
lee63 Thanked / Liked this Post
-
11-05-2018, 06:50 AM #7
-
lee63 Thanked / Liked this Post
-
11-05-2018, 07:51 PM #8
Queni drum sensor
-
lee63 Thanked / Liked this Post
-
21-05-2018, 02:08 AM #9
- Join Date
- Oct 2014
- Location
- East riding of yorkshire
- Posts
- 3,881
- Thanks / Likes
- 3865
Hi dave, really really sorry im late to reply here (had my notifications turned off for some reason)
To answer your questions , yes mine is pump fed and yes the sensor is in the dirty side. The difference is mine triggers a clean cycle when the dirty side water level gets high and im assuming yours triggers when clean side gets low both indicating the screen is blocking.
I only know this to be fair as i actually spoke with mike at queni koi on how to swap them over when i bought the drum as i do plan on running it gravity fed with in the future its so simple its unreal ha ha, basically my sensors mounting arm screws into pre tapped holes in the centre partition (the wall between dirty and clean side) the tapped mounting holes are on both sides of this for the sensors bracket to be attached either side. Its just a case of simply taking the bracket off one side and putting it onto the other, only other thing i have to do is turn the sensor the other way round i believe and set to the required level in the clean side that i desire
Glad you got it sorted though
Sent from my iPhone using TapatalkIts always a work in progress
-
freddyboy Thanked / Liked this Post
-
21-05-2018, 04:20 AM #10
Aquaforte Dm vario 20000 pumps
Still for sale. Postage available for cost Sent from my SM-S901B using Tapatalk